CABLES TO GO 29397
The VGA+3.5mm Audio+RS232 over Cat5 Box Transmitter to Wall Plate Receiver Kit allows you to extend a VGA, 3.5mm audio signal, and RS232 over two Cat5/Cat5e/Cat6 unshielded twisted pair cables up to 300ft without signal degradation at 1920x1200 or 1920x1080 resolutions. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. In addition, this solution utilizes phantom power providing you the flexibility to power at either the transmitter or receiver end. EQ (sharpness) adjustments can be made for optimal signal clarity.
The EDID copy feature ensures compatibility with any monitor. Built-In power surge protection and high ground loop immunity ensure high performance signal extension.
The RS232 serial port supports full-duplex data communication at 230Kbps and is fully compatible with all RS232 protocols. Point-to-point or multi-drop data communication is supported.
*Longer distances can be achieved at lower resolutions
LOOK FOR SIMILAR ITEMS BY CATEGORY ...
VGA OVER CAT5