CABLES TO GO 40183
Audio/video installations in educational and commercial settings often require in-wall rated cable. Our CMG-rated line was specifically engineered to meet this requirement while overcoming common challenges faced by installers in these environments.
This all-in-one cable combines computer video, composite video, RCA and 3.5mm stereo audio as an economic alternative that saves installation time. The HD15 connectors are low profile (1.25in total depth) which saves valuable space in the gang box, while the rounded shape (fits 1.25in inner diameter mounts) accommodates smaller projector mounts so that the cable can be easily hidden from view. The RCA and 3.5mm connectors are also low profile (1.5in total depth) and feature specific breakout lengths to fit your application. The cable is conveniently labeled to identify the 6in breakout for mounting in electrical boxes and the 20in breakout for the display or projector end.
This combination cable is constructed to prevent any EMI/RFI interference, and ensure the highest quality signal is transmitted for optimal audio/video performance.
CMG-rated cables meet many NEC requirements for Communications Cables General Purpose In Wall Use. Our cables meet the following ratings: CMG, FT4, CM, CL3, CL2, CMX, CL3X, and CL2X.
Always check with your local authority on building requirements to verify cable requirements before beginning any installation.Connector 1:
One HD15 Male, Three RCA Male and One 3.5mm Stereo MaleConnector 2:
One HD15 Male, Three RCA Male and One 3.5mm Stereo MalePlease Note:
Pin 9 is not loaded. Pin 9 is not required for standard computer video applications. This cable does not support EDID communication.
LOOK FOR SIMILAR ITEMS BY CATEGORY ...
VGA WITH COMPOSITE VIDEO, STEREO AUDIO & 3.5MM CABLES