CABLES TO GO 29342 USB Superbooster Wall Plate Kit

C2G

ITEM SHIPS DIRECTLY FROM MANUFACTURER. WE WILL NOTIFY YOU IF IT IS NOT AVAILABLE FOR SHIPMENT.

Conquer USB length limitations, and put your USB devices where you want them with our patent-pending USB superbooster wall plate. This wall plate solution extends the distance of a USB device to a host computer up to 150 feet so you can place your USB projector, interactive whiteboard, camera, printer, hub, or any other USB device exactly where you want it! This wall plate is powerful yet simple, with no drivers to install or special software required so it's compatible with any computer that supports USB.

This plug-and-play device consists of a transmitter unit and a receiver unit incorporated into two, single gang Decora®-compatible wall plates. The transmitter/receiver pair is connected via standard Cat5, Cat5E, or Cat6 patch cables (not included) allowing for easy in-wall installation. This provides a clean, finished installation that is important for homes, classrooms, offices or any other facility where you don't want unsightly visible cables lying around.

Use pre-terminated network cables or pull unterminated cable and terminate with toolless IDC RJ45 connectors (included). Bus-powered, the USB superbooster wall plate requires no external power source. These wall plates fit standard J-boxes, and are compatible with Leviton Decora® brand cover plates. Compliant with USB Specification 1.1.

Transmitter Connectors: One USB Type B Female (Input) and One RJ45 Female (Output)
Receiver Connectors: One RJ45 Female (Input) and One USB Type A Female (Output)

Please Note: The power demands of devices such as electronic whiteboards, external drives and USB hubs, may require the use of external power for proper operation. Please consult with your device manual or manufacturer for details. 

During installation, do not connect the transmitter to the PC until all other connections in the system have been made. The other connections in this system would include the Cat5e/6 cable between the transmitter and receiver, a USB hub placed at the receiver, an interactive whiteboard, or any other USB device that would be connected to the receiver. Connecting the transmitter to the computer without first making other connections may result in damage to the Superbooster.

Decora® is a registered trademark of Leviton Manufacturing Company, Inc. This product is not manufactured or endorsed by the Leviton Manufacturing Company, Inc.