CLEARONE 910-154-015 Interact MIC Microphone Pod w/ 360 Degree Coverage for Use w/ Interact AT Mixer: Go Electronic

CLEARONE 910-154-015 Interact MIC Microphone Pod w/ 360 Degree Coverage for Use w/ Interact AT Mixer

MANUFACTURER: CLEARONE
PART NUMBER: CLEARONE 910-154-015

PRICE: $250.95

AVAILABILITY: SPECIAL ORDER - SHIPS IN 1 WEEK

CLEARONE 910-154-015

NOTE: 3 INTERACT MIC UNITS ARE PICTURED ABOVE. PRICE IS FOR ONE INTERACT MIC UNIT.

The INTERACT AT premium audio conferencing system includes all the necessary audio equipment and peripherals for any conference room while delivering exceptional audio quality at an affordable price. Customize your solution with multiple microphones and speaker options, direct connection to enterprise telephones, USB audio, a room controller, plus the ability to connect to the rich-media systems.

Main components of the solution include:

INTERACT AT mixer- Audio conferencing mixer with integrated 9-AEC channels, 2 Line Input/Output, Telephone interface and integrated amplifier. Provides advanced audio processing for superior sound quality. Note: The total number of microphone devices supported by the Interact AT mixer is three. It can be any combination of Interact Mic or Interact Mic Ex devices.

INTERACT MIC - INTERACT MIC is a microphone pod with 3-elements providing a complete 360 degree coverage. Audio from Interact Mic is sent to mixer via single Cat 5 cable using a digital transport method. A total of 3-Interact Mic devices can be used with a single mixer.

INTERACT MIC EX - INTERACT MIC EX is a microphone breakout device allowing up to three external microphone connections per unit. Each box contains three industry standard XLR microphone connectors and built in microphone pre-amp and phantom power for direct interface to any professional microphone. Boxes are daisy-chained from mixer using standard RJ-45 cables. Boxes can be rack-mounted with mixer or strategically positioned throughout room to minimize microphone cable runs. A total of 3-INTERACT MIC EX devices can be used with a single mixer.

INTERACT COM - The Interact COM is an audio interface device that can be used with either the Interact AT or Interact Pro systems. The device provides an interface to telephone sets via the headset port or to PC audio via a USB port.

INTERACT DIALER - The Interact Dialer is a tabletop controller that provides intuitive interface that emulates a telephone keypad.

INTERACT Software Application - The Interact Software is a Windows base application for programming, configuration, and control of the Interact Pro and Interact AT systems.

APPLICATIONS:

Unified Communications

Use with Rich-Media Systems: Web Conferencing, Personal Computer, IP Telephony, Video Conferencing

Board Rooms

Conference Rooms

Executive Offices

ADVANTAGES:

Enables Unified Communication in the conference room

USB port connects to PC for Skype, WebEx and other A/V conferencing applications

Headset port connects to Cisco, Avaya, and Nortel handsets

Sound quality exceeds traditional conference phone with ClearOne's HDConference technology
- Simplified installation combines all microphone signals onto a single data cable minimizing conduit and raceway requirements.
- Noise cancellation reduces background noises from fans or HVAC systems
- Automatic level controls keep participants' audio balanced and consistent

Scalable and flexable
- Wireless or wired controller option
- Multiple speaker mount options: wall, ceiling or custom
- Select appropriate number of MIC EX and MIC PODS (max three) to fit the applications

Integral network management system enables remote configuration, contol and monitoringInteroperates with NetStreamsT A/V over IP systems

Easy to install, program and use

SPECIFICATIONS

Audio Performance
Conditions: Unless otherwise specified, all measurements are performed from 20 HZ to 15 kHz BW limit (No Weighting)
Dynamic Range: > 80 dB (Non-A Weighted)
THD+N: < 0.02 %

Audio Mixer
AEC tail time: 128 ms
Adaptive Noise Cancellation: 6-15 dB
Gating: Adaptive ambient, 1st Mic Priority, Look-ahead Gating
Up to a total of 3 INTERACT MIC or INTERACT MIC EX devices can be connected to the INTERACT AT Mixer
48 kHz Sample Rate, 24-bit Resolution

Audio Mixer Line Input
Connection: Unbalanced RCA
Impedance: 10 kO
Nominal Level: -10 dBu
Maximum Level: +9 dBu

Audio Mixer Playback
Connection: Unbalanced Left and Right RCA (Summed Internally)
Impedance: 10 kO
Nominal Level: -10 dBu
Maximum Level: +15 dBu

Audio Mixer Line Output
Connection: Unbalanced RCA
Impedance: 10 kO
Nominal Level: -10 dBu
Maximum Level: +9 dBu

Audio Mixer Record Output
Connection: Unbalanced Left and Right RCA (Mono Source Split Internally)
Impedance: 10 kO
Nominal Level: -10 dBu
Maximum Level: +9 dBu

Audio Mixer Amplifier Output
Connection: Left and Right Push Terminals
Power: 5 Watts
Frequency Response: 20 Hz — 15 kHz (+/-1 dB)
Dynamic Range: > 80 dB
THD+N: < 0.50% (+5 dBu Line Input @ 1 kHz)

Telephone Interfacenterface
Telephone Audio Performance
Conditions: Unless otherwise specified, all measurements are performed with Transmit Limiter and Receive ALC disabled
Frequency Response: 250 Hz to 3.3 kHz ±1 dB
THD+N: < 0.30% re-max level 250 Hz to 3.3 kHz
SNR: > 62 dB re-max level
Telco Line Echo Cancellation
Tail Time: 32 ms
Null: 55 dB Nominal
Telephone Noise Cancellation
Noise Cancellation 6-15 dB Attenuation

RS-232 Control Port
DB9 Female
Baud Rates: 9,600 / 19,200 / 38,400 / 57,600 (Default) / 115,200
Protocol: 8 Bit, 1 Stop, No Parity
Hardware Flow Control ON (Default)/OFF

USB Configurationonfiguration Port
USB 1.1 Compatible
Type: B Connector

VISCA Camera Port
Din, 9600 Baud, No Flow Control

LAN
10/100 Ethernet
RJ-45 with Activity LED
Supports: Telnet, HTTP

Link Bus
Connection: RJ-45 with CAT5 Daisy-chained
Maximum Distance: 60 feet from Mixer to last device in chain
Maximum Number of INTERACT MIC Devices: 3 - Any Mix of INTERACT MIC or MIC EX

Maximum Number of INTERACT COM Devices: 1 per INTERACT Mixer

Configurationonfiguration Softoftware
INTERACT Supports: Microsoft XP, Vista and Windows 7

INTERACT COM
Versions: Wired or Wireless (2.4 GHZ)

USB Audio Channel:
USB 2.0 Compatible
Connector: Mini Type B
TX and RX Channel, 16-bit at 16 kHz

Headset Audio Channel:
Connector: RJ-9
Supported Telephone Sets: Most Cisco, Avaya, and Nortel Phones
Audio Performance: Frequency Response: 40 to 3300 Hz, THD and Noise: < 0.04% Re-max Level with 0 dB Gain @ 1 kHZ, Dynamic Range: > 84 dB (Non A-Weighted)

Audio Processing:
Receive Automatic Level Control
Line Echo Cancellation for Side-Tone Elimination

GPIO:
Pin 1: Global Mute (C)
Pin 2: Global Mute (S)
Pin 3: ON/OFF Hook (C)
Pin 4: ON/OFF Hook (S)
Pin 5: 5V DC up to 40 mA

INTERACT DIALER
Available in Wired or Wireless Versions
Functions: Dialing, Volume Control, Mute Control
Communications: Wired Version: RS-232 Connected to Mixer, Wireless Version: 2.4 GHz DSSS to INTERACT COM Wireless

INTERACT MIC — Tabletop Microphone
Coverage: 360°
Frequency Response: 60 Hz- 14 kHz
THD+N: < 0.08% (-45 dBu Input @ 1 kHz)
Sensitivity: -45 dBu

INTERACT MIC EX - Microphone Distribution Box
Connection: Female XLR Balanced
Maximum Level :+18 dBu
Frequency Response: 20 Hz — 15 kHz THD + N: < 0.01 %
Phantom Power: 24 V @ 10 mA
Impedance: 5 kO per Leg or 10 kO Balanced

Power Supply
Primary Voltage: 100 to 240 VAC
Auto-Sensing, 50-60 Hz
Power Consumption: 32 W Maximum

Dimensions (W x D x H)
INTERACT AT Mixer: 17" x 7.5" x 2" (43.2 cm x 19.1 cm x 5.1 cm)
INTERACT DIALER: 10.5" x 4.5" x 2.75" (26.7 cm x 11.4 cm x 6.9 cm)
INTERACT MIC EX: 4.7" x 5.6" x 1.7" (11.9 cm x 14.3 cm x 4.4 cm)
INTERACT COM: 4.7" x 5.6" x 1.7" (11.9 cm x 14.3 cm x 4.4 cm)
INTERACT MIC: Diameter: 7" (17.8 cm) Height: 1.5" (3.8 cm)

Weight
INTERACT AT Mixer: 4.5 lb. (2 kg)
INTERACT DIALER: 2.0 lb. (0.9 kg)
INTERACT MIC: 1.5 lb. (0.7 kg)
INTERACT MIC EX: 1.5 lb. (0.7 kg)
INTERACT COM: 1.5 lb. (0.7 kg)
Compliance
ROHS Compliant
WEEE Compliant
UL Safety Listed
AES48-2005 AES Standard on Grounding and EMC Practice

LOOK FOR SIMILAR ITEMS BY CATEGORY ...

CLEARONE NEFSIS HARDWARE

SHOPPING CART

YOUR CART IS CURRENTLY EMPTY.