---

DATAPATH X4-1U

The Datapath x4 is a stand alone display wall controller that accepts a standard single or dual-link DVI input and can flexibly display this across four output monitors.

Each output can be driven as DVI or analog RGB, and can represent an arbitrary crop region of the original input image. Additionally, each output can be independently mirrored or rotated through 90°, 180° or 270° to support creative mixes of landscape and portrait monitors.

Datapath have added active equalization hardware on the x4 which is able to compensate for these losses and support cable lengths of up to 20m even at full dual-link resolutions (330Mhz pixel clocks). Lower resolutions will allow even longer cable lengths.

FEATURES

Infinite creative configurations

Up to Ultra HD input, 4 HD 1080p outputs

Rotates, crops, scales, mirrors and bezel corrects

Accepts dual-link DVI or single-link DVI inputs

Power down configuration save facility, power up instantly with no re-set up required

Compatible with Mac OS X 10.6

Active equalization hardware for longer cable support up to 20m for full dual-link, for more flexible positioning.

ADDITIONAL FEATURES

Each output monitor can take its input from any region of the input DVI image, since all the required cropping, scaling, rotation and frame-rate conversion is handled by the x4 hardware. These regions can overlap to allow any output to replicate another, or they can be configured to support any creative splice of the source material. This allows the support of many non-rectangular screen arrangements with uneven gaps, and any mix of monitor orientations.

GENLOCK

The Datapath x4 will auto-sense input and output frame rates and automatically genlock when possible. Four identical output monitors will automatically be driven genlocked and if the input timings match they are additionally genlocked and clock-locked to the source signal.

WALL DESIGNER

Each output monitor can take its input from any region of the input DVI image, since all required cropping, scaling, rotation and frame-rate conversion is handled by the x4 hardware. These regions can overlap to allow any output to replicate another, or they can be configured to support any creative splice of source material. This allows the support of many non-rectangular screen arrangements with uneven gaps and mix of monitor orientations and projects that include differing monitor manufacturers and even projection systems.

SPECIFICATIONS

Dimensions: 438 x 173 x 40mm / 2.25Kg

Operating Temperature: 0-35 DegC; 32-96 DegF

Power requirements: 5V DC, 18W. Universal mains power adapter supplied (100- 240V). Note x4-1U has internal PSU (100-240V).

USB 2.0: Full speed (12Mbits/s) operation supported

Signal Support: Progressive Signal

Cooling: Cooling by internal fan. The output vents should not be restricted. Note: the x4-1U has a larger fan producing less noise.

1x DVI-D DL capture: To 330Mpixels/s

Input Surface: 4k x 4k maximum

4x single link DVI or analog: RGB outputs; To 165Mpixels/s

Output screens resolutions: Up to 2.5Mpixel (max. 2048 pixels in either direction)

Arbitrary Up scaling: 64 x original surface area

Firmware Support Updates: supported via USB

MTBF: 50,000hrs

Warranty: 3 years

DOWNLOAD DATAPATH X4-1U PRODUCT MANUAL

DOWNLOAD DATAPATH X4-1U BROCHURE

---

LOOK FOR SIMILAR ITEMS BY CATEGORY ...

TRADE SHOW AV    DATAPATH