DATAPATH x4 Stand-Alone Display Wall Controller
PART NUMBER: DATAPATH X4
AVAILABILITY: USUALLY IN STOCK.
ITEM SHIPS DIRECT FROM MANUFACTURER/SUPPLIER. WE WILL NOTIFY YOU VIA EMAIL IF ITEM IS NOT IN STOCK FOR SHIPMENT.
The Datapath x4 is a stand alone display wall controller that accepts a standard single or dual-link DVI input and can flexibly display this across four output monitors.
Each output can be driven as DVI or analog RGB, and can represent an arbitrary crop region of the original input image. Additionally, each output can be independently mirrored or rotated through 90°, 180° or 270° to support creative mixes of landscape and portrait monitors.
Datapath have added active equalization hardware on the x4 which is able to compensate for these losses and support cable lengths of up to 20m even at full dual-link resolutions (330Mhz pixel clocks). Lower resolutions will allow even longer cable lengths.
Infinite creative configurations
Up to Ultra HD input, 4 HD 1080p outputs
Rotates, crops, scales, mirrors and bezel corrects
Accepts dual-link DVI or single-link DVI inputs
Power down configuration save facility, power up instantly with no re-set up required
Compatible with Mac OS X 10.6
Active equalization hardware for longer cable support up to 20m for full dual-link, for more flexible positioning.
ADDITIONAL FEATURESEach output monitor can take its input from any region of the input DVI image, since all the required cropping, scaling, rotation and frame-rate conversion is handled by the x4 hardware. These regions can overlap to allow any output to replicate another, or they can be configured to support any creative splice of the source material. This allows the support of many non-rectangular screen arrangements with uneven gaps, and any mix of monitor orientations.
GENLOCKThe Datapath x4 will auto-sense input and output frame rates and automatically genlock when possible. Four identical output monitors will automatically be driven genlocked and if the input timings match they are additionally genlocked and clock-locked to the source signal.
WALL DESIGNEREach output monitor can take its input from any region of the input DVI image, since all required cropping,
scaling, rotation and frame-rate conversion is handled by the x4 hardware. These regions can overlap to allow any output to replicate another, or they can be configured to support any creative splice of source material. This allows the support of many non-rectangular screen arrangements with uneven gaps and mix of monitor orientations and projects that include differing monitor manufacturers and even projection systems.
Dimensions: 235 x 175 x 44mm / 1.10Kg
Operating Temperature: 0-35 DegC; 32-96 DegF
Power requirements: 5V DC, 18W. Universal mains power adapter supplied (100- 240V).
USB 2.0: Full speed (12Mbits/s) operation supported
Signal Support: Progressive Signal
Cooling: Cooling by internal fan. The output vents should not be restricted.
1x DVI-D DL capture: To 330Mpixels/s
Input Surface: 4k x 4k maximum
4x single link DVI or analog: RGB outputs; To 165Mpixels/s
Output screens resolutions: Up to 2.5Mpixel (max. 2048 pixels in either direction)
Arbitrary Up scaling: 64 x original surface area
Firmware Support Updates: supported via USB
Warranty: 3 years
DOWNLOAD DATAPATH X4 PRODUCT MANUAL
DOWNLOAD DATAPATH X4 BROCHURE
LOOK FOR SIMILAR ITEMS BY CATEGORY ...
TRADE SHOW AV