Exterity AvediaStream TVgateway, Transcoder and Encoder blades must be installed in one of three AvediaStream chassis (1, 3, or 10 slots), which are designed for a wide range of organizational needs and budgets. All chassis are hot-swap enabled to allow movement or replacement of blade without powering down the entire unit. This saves time, and, in multi-slot chassis, avoids disruption to other IPTV services currently operating.
AvediaStream c1101Compact unit providing one video feed.Perfect for smaller installations or organisations requiring specific additional features.
AvediaStream c1103Supports three blades with a common power supplyExpands your possibilities with simultaneous support for both Encoders and TVgateways1U 19" rack
AvediaStream c1110Our largest and most advanced IPTV chassis supports 10 blades with built-in redundancyPassive backplane for high performanceRedundant power supplies for higher availabilityHot-swap cooling fans allow replacement without the need to power-down the unit4U 19" rack
The AvediaStream c1110 chassis comprises of ten hot-swap module slots capable of accepting any Exterity AvediaStream Blade. All slots are capable of streaming pre-recorded and live TV and Radio (news, sports, entertainment, educational) HD and SD channels over your existing network.
Easy SetupHot-swap components allow quick and non-intrusive upgrades to existing installations and provides a high level of redundancyTen fully independent module slotsUp to three hot-swap PSUsFive hot-swap fan modulesPassive backplane for cutting edge IPTV reliabilityAluminium chassis for lighter weight and easy to use carry/rack positioning handles19" rack mountableSuitable for HD or SD content
InterfacesTen independent 802.3 10/100/1000 Ethernet (RJ-45 socket)*Ten independent Serial RS232 Port for local administration (RJ-45 socket)Individual status LEDs per slot for blade
Hot-swap PartsTen module bays; capable of accepting any Exterity encoder or TVgateway blade.Up to three PSU's (depending on configuration); allows replacement of any supply without affecting services.Five fan modules; allows quick unobtrusive replacement in the event of a fan fail
End PanelsSupplied with ten blank blade ends — protects unused module slots prior to the chassis reaching capacity
PowerUp to three hot-swap 110-240v (50Hz-60Hz) 300W PSUs with individual power cords.Enabling N+1 PSU redundancyPower consumption: 10-500W (depending on configuration)
EnvironmentOperating: 0 ...+40°C / +32 ... +122°FStorage: -20 ...+70°C / -4 ... +158°FOperating Relative Humidity: 5 -95% (non-condensing
Physical DimensionsHeight: 180 mm (7 inch)Width: 444 mm (17.5 inch)Length: 274 mm (10.79 inch)Standard 19 inch server rack occupying 4u
Weight:Chassis: 6.0kgPSU: 1.0kg each
RegulatoryCE: EN55022: 2006, EN61000: 2006, EN55024:2003IEC 60950-1 1st Ed 2001, EN-60950-1: 2004UL/CSA: 47CFR: 2008, ANSI C63-4: 2003CSA 60950-1-03, 1st Ed. UL 60950-1, 1st Ed.
DOWNLOAD EXTERITY AVSTR-C1110-US BROCHURE
LOOK FOR SIMILAR ITEMS BY CATEGORY ...