The Gefen 4x1 3G-SDI Switcher allows any one of four high-bandwidth 3G-SDI, HD-SDI or SDI sources to be switched to a single output without a switching delay or loss of signal quality. Ideal for cutting equipment costs in the studio by enabling shared signal routing, this 3G-SDI Switcher supports source resolutions up to 1080p and has convenient switching methods.
Four 3G-SDI sources connect to BNC input jacks on the input side of the Gefen 4x1 3G-SDI Switcher. A single 3G-SDI output connects on the BNC output. Power is applied to the 4x1 3G-SDI Switcher and video is transmitted to the output device. Any 3G-SDI input source is selectable via the included IR remote control or a selector button on the front panel. Sources may also be selected by using the RS-232 communications port.
Switches between four 3G-SDI sources to a single output device without latency or signal degradation
Resolutions up to 1080p are supported
Backwards compatible with SDI and HD-SDI
Supports NTSC, PAL, and all HD formats
Switching is controlled via front panel push button, IR Remote (included), or RS-232 Commands
Locking Power Supply
Video Bandwidth: up to 3.0 Gbps
SDI (SMPTE 259M, up to 360 Mbps)
HD-SDI (SMPTE 292M, up to 1.485 Gbps)
3G-SDI ( SMPTE 424M/425M, up to 3.0 Gbps)
<>Video Input Connectors: (4) BNC, female
Video Output Connector: (1) BNC, female
RS-232 Control Port: DB-9, female
Power Supply: 5V DC, Locking
Power Consumption: 10W (max.)
Operating Temperature: 0 - 40 °C
Dimensions: 7.5" W x 3.5" D x 1.6" H
Shipping Weight: 2 lbs.