ISHOT EM17001 iShot® XBlock® HD-SDI Interface Board Kit for Sony -FCB-SE600 - AS

MANUFACTURER: ISHOT

PART NUMBER: ISHOT EM17001
PRICE: $630.00

AVAILABILITY: SHIPS IN 2-4 WEEKS

ISHOT EM17001 iShot® XBlock® HD-SDI Interface Board Kit for Sony -FCB-SE600 - AS

ISHOT EM17001 iShot® XBlock® HD-SDI Interface Board Kit for Sony -FCB-SE600 - AS

MANUFACTURER: ISHOT
PART NUMBER: ISHOT EM17001
PRICE: $630.00

AVAILABILITY: SHIPS IN 2-4 WEEKS


ISHOT EM17001

  • HD-SDI interfacing solution for the Sony FCB-SE600
  • Includes interface module, cables and mounting kit
  • Uses the camera's digital output to give optimum image quality
  • Supports all available HD modes — 1080p, 1080i (PsF) and 720p at 25Hz, 30Hz, 50Hz and 60Hz
  • Compliant with SMPTE 274M and SMPTE 296M
  • Video mode selection switch and built in test pattern
  • RS-232 communications port for camera control
  • Hardware focus and zoom controls
  • Compatible with frame grabbers
  • RoHS compliant

    The iShot® FCB-SE600-HDSDI is a complete interface solution to provide real-time HD-SDI video from the Sony FCB-SE600 camera.

    This interface module provides a cost-effective solution to take full advantage of the high definition digital video provided by the Sony FCB-SE600 block camera. This interface board connects directly to the Sony FCB-SE600 camera's digital output to provide superior image quality. All camera HD video modes are supported: 1080p/30, 1080p/25, 1080i/60 (30 PsF), 1080i/50 (25 PsF), 720p/60, 720p/50, 720p/30 and 720p/25.

    A DIP switch located on the rear of the module allows the HD video mode to be changed without the need to send serial commands to the camera. Other convenient hardware control features include the ability to dynamically change the camera's focus and zoom settings, again without the need to send serial commands. See connector J3 for more details.

    The iShot® FCB-SE600-HDSDI has a built in test pattern which conforms to the SMPTE RP-219-2002 specification. The pattern generation feature is controlled via connector J3. The product is supplied as a kit consisting of the interface module, mounting kit and cables, though the board alone may also be ordered without the mounting kit and cables if required.

    The physical outline of the iShot® FCB-SE600-HDSDI precisely matches the rear profile of the FCB-SE600 camera and the supplied mounting kit allows the module to be securely and neatly attached to the camera.

    iShot® also manufactures and supplies a range of HD-SDI video capture cards for interfacing to this module if required. As well as zero CPU acquisition, these cards provide serial communications and access to the camera's reset line for control of standby mode. These cards are available in a range of formats — not only standard PC formats (PCI & PCI-Express) but also in embedded form-factors such as PCI/104-Express for embedded applications.

    ITEMS INCLUDED:
  • 10-way ribbon cable for serial communication and control. (Connects to J3)
  • 4-way ribbon cable for power. (Connects to J2)
  • 30-way micro-coax digital video cable.
  • Active FCB-SE600-HDSDI interface board.
  • Mounting kit (including bracket, screws and spacers).
  • 75Ω MCX to BNC cable.

    DOWNLOAD ISHOT EM17001 BROCHURE

    LOOK FOR SIMILAR ITEMS BY CATEGORY ...

    INTERFACE BOARDS    HD-SDI INTERFACES