---

KANEXPRO HD50FTCL314

The KanexPro High Speed HDMI cables with Ethernet are designed with built-in booster for applications that require high-performance transmission of HDMI digital video and multi-channel audio signals. These cables have active amplification built-in to prevent impedance mismatch, caused by the cable attenuation, dielectric losses and compensation for skin effect over long distances.

For flawless transmission, the output of the cable is placed at the end of the display to amplify full signal transmission with zero signal loss. The built-in booster does not require an external power, since it is using the 5-volt from pin 18 on the HDMI cable extracting the power from the display. These cables are fully CL3 certified which surpasses any in-wall code requirement for residential or commercial installations.

High Speed HDMI cables with Ethernet

Built-in booster for active signal amplification

8—levels of selectable equalization

3D and 4Kx2K support (4-times the resolution of 1080p)

Compatible with prior versions of HDMI and DVI

Data rates up to 10.2 Gbps

Support color depths to 48 bits

Up to 100 Mbps of bi-directional (full-duplex) bandwidth is accessible over the HDMI Ethernet Channel

HDCP compliant

No external power required

DOWNLOAD KANEXPRO HD50FTCL314 BROCHURE

---

LOOK FOR SIMILAR ITEMS BY CATEGORY ...

KANEXPRO