Directly control your ATEM switcher from your desktop or laptop using the included free ATEM Software Control for Mac or Windows. You can load the media pool with graphics, adjust focus, iris and color balance cameras, change switcher settings, and even mix audio from your cameras. You can even run multiple copies for busy live productions when more than one person is working on the job, all from the most elegant and fastest to use software available.

Switcher Control Tabs
The ATEM Software Control panel is designed with separate tabs so it's easy to find the controls you need. The switcher tab is for switcher control and includes palettes for adjusting keys, transitions, media players and more. The settings tab changes the switcher settings and customizes the multi view, and the media pool tab manages graphics. A dedicated tab for the audio mixer control includes faders and meters for every input and master level control.

Select Source
You get the most efficient live production workflow with ATEM! The program bus is always live, so when you select a source it will immediately go on air! Take advantage of the advanced live switching workflow by using the preview bus, with selections you make appearing in the preview screen. You can see what you have ready to go on air, and take them live with a press of the cut or auto buttons! Using the preview bus helps you see the next transition source so you can confidently control your live production.

Transition Control
ATEM Switchers are designed to give you fast and flexible control during live production operation. The transition control block lets you quickly select your transition style, you can choose between mix, dip, wipe or even DVE and animated stingers if you are using the ATEM 1 M/E or 2 M/E Production Studio 4K switcher. Simply push the cut button for an immediate transition, or select timed automatic transitions that are triggered by pushing the AUTO button. You also get full manual control with the fader bar!

Transition Settings
ATEM gives you precise transitions adjustments! The switcher palettes are on the right side of the switcher control and are fast and logical to use. When you open the transition palette you can see every adjustable option for each type of transition. Simply choose the transition type and you can adjust all the individual parameters. You get so many options you will always find the perfect style for your production as there is almost no limit to the creative transitions you can create!

Wipe Transitions
Create over 100 different styles from the 18 built in wipe pattens. Using the ATEM Software control transition palette, you can select your ideal wipe pattern, change its symmetry or even invert it! Wipe patterns can be softened or have colored borders with customizable width and softness. You can even feed live video inside a wipe border creating interesting geometric patterns with three live video streams at the same time. You get amazing wipe transition flexibility with ATEM Production Studio 4K switchers!

DVE Settings
With the ATEM 1 M/E and 2 M/E Production Studio 4K models that include the built in DVE, you can push, spin, squeeze and swoosh your live video from one camera to the next with powerful built in DVE transitions. The transition palette gives you precise control over the multiple DVE transition options. Choose from over 35 dramatic DVE moves that will bring an extra level of excitement to your production. DVE transitions can be flipped and reversed giving you even more creative options.

Camera Control
Get full control of your cameras right from the ATEM software control! The new Blackmagic Studio Camera can be controlled via the SDI program feed to the camera, so you can control its built in camera settings and full color corrector, all remotely from the ATEM software control panel! There are two types of control interface, a CCU layout for traditional camera control style, or a color corrector interface which is the same as DaVinci Resolveís primary color corrector so you can use all your color correction skills from DaVinci Resolve for adding incredible creativity to live production!

SuperSource Control
Available on the ATEM 2 M/E Production Studio 4K, Super Source lets you add multi box picture-in-picture compositions to your live broadcasts quickly and easily! Using the ATEM Software Control itís easy to choose a preset SuperSource layout, customize it, or create your own from scratch. You get all the controls you need in one place, making it super fast to choose and save presets, add artwork, and adjust individual box parameters including size, position, border, crop, shadow, and more!

On Air
Once your upstream settings are customized, the fastest way to bring them on air is to use the ON AIR button! The on air buttons enable or disable the key signal, plus they also indicate which keys are live on air. When youíre switching live it's vital to know which keyers are active so you can select it as part of the next transition. Each upstream keyer has its own dedicated on air button so you will get 1 on the ATEM Production Studio 4K and 4 on the advanced ATEM 1 M/E Production Studio 4K model.

Keyer Control
When you need fast, precision keying you can use the software controls to adjust keying with high accuracy. Key backgrounds are never perfectly flat, so itís important to have easily adjustable controls that let you quickly and precisely fine tune your key settings in real time for the best quality live broadcast results. The ATEM Software Control gives you precise control over every key parameter and you can use your mouse or trackpad to quickly adjust keys for the perfect result.

Fader Bar
The most experienced vision switchers know that sometimes the only way to get a dramatic multi camera mix during live performances is with manual fader control! Automatic transitions are smooth but often do not have the subtlety needed when mixing between wide and close up angles of performances like music performances. With manual control you can mix shots together and hold the mix until the right moment before completing the transition. The fader bar also gives you manual control of wipe, key and even DVE transitions.

Auto Transition
Smooth automatic transitions are easy with the auto transition button. Simply set your preferred transition rate between 1 and 250 frames using the ATEM software control, and every time you hit the AUTO button your ATEM Production Studio 4K switcher will perform a perfectly timed, smooth transition. You can use auto transitions for every part of the ATEM switcher including dissolves, dip, mix, fading on key sources, wipes and animated DVE transitions.

Preview Transition
The PREV TRANS button lets you rehearse and preview complicated transitions before you take them on air! Your ATEM Production Studio preview video can be seen on your multi view screen or on a monitor connected to the switchers SDI preview output. Preview transition lets you verify the most complicated transition with mix, dip, wipe, DVE and even keys without affecting your program output. Preview transitions is the best way to ensure your transition is perfect before going to air.

Fade to Black
Ideal for the start and end of your production or fading down for commercial breaks, fade to black (FTB) is the absolute last layer of the switcher and ensures all the layers are faded down together. Once the program output has been faded to black, the FTB button will flash red until it is pressed again. Selecting fade to black again will then fade up from black at the same rate. With a dedicated fade to black button, you can be sure all sources are faded cleanly in sync for the perfect program end!

Full Audio Mixer
The built in multi channel audio mixer lets you adjust the level and balance of the audio from each switcher input, plus the additional HiFi and balanced audio input connections. Each audio input is metered so you can always see the levels of each source accurately. You can set the audio to auto fade up and down as the switcher sources are changed and the mixed audio is then embedded into all video outputs!

Switcher Snapshot
No matter how complicated your switcher set up is, you can quickly save it to your computer for fast recall any time you need it. Save complete or partial switcher setups as time stamped XML files so you'll never accidentally overwrite a saved setup. Save switcher positions, keys, wipes, DVE moves and even your entire media pool content! Any updated media is added to the media folder and mapped to the latest XML as you keep saving. Thats perfect for moving your job setup between ATEM switchers.

ATEM features easy download of all your RGBA graphics and clips. From the software control media tab you can manage the built in media pool and see the status of each loaded graphic. You can drag and drop frames into the media pool spaces and they will automatically download to the switcher. You can also download graphics direct from the included Adobe Photoshop plug in! The Media pool can be saved as part of a switcher snapshot, so you can save your switcher settings and graphics on a single disk.

Switcher Settings
When you're setting up your job you can use the switcher settings tab to adjust the video format of your switcher as well as the media pool size and input labeling. You can also fully configure the multi view output by arranging the camera inputs and program view into 4 different arrangements. Setting up your switcher is so easy with the ATEM software control because everything has been laid out so that settings are fast to change as required. That makes setting up for new jobs easy!

Control Options
Now you can take your ATEM Production Studio 4K switcher on the road because the included ATEM Software Control runs from your laptop. You get complete switcher control that includes live switching, keyer and transition control, loading the media pool, all switcher settings and even audio mixing control. The ATEM switcher and laptop are so small you can fit them all in a bag or backpack. Now you can go to any event as there is no more portable solution than the ATEM!