---

REVOLABS FUSION4

REVOLABS FUSION4 Basic System does NOT include microphones. Must order Solo microphones separately. Choose up to 4 microphones.

Select from these options (okay to mix and match):
REVOLABS 06-XLRMIC-BLK-11 Universal Wireless Adapter for Handheld Microphones
REVOLABS 01-EXEMICEX-BLK-11 RF-Armor Lapel-Style Wireless Solo Microphone
REVOLABS 05-TBLMICEX-OM-11 RF-Armor Omni-Directional Solo Tabletop Wireless Boundary Microphone
REVOLABS 05-TBLMICEX-DR-11 RF-Armor Uni-Directional Solo Tabletop Wireless Boundary Microphone

MICS SOLD SEPARATELY. Microphones shown at bottom of page.

Great audio, wireless mobility, and simple to install
Simply plug the cable into the AV system or phone system and it works. No software configuration is necessary. Even the Fusion box is designed to be easy to use— vertically or horizontally. No equipment rack needed! Just set the Fusion system on the console!

Cost-Effective
The Revolabs Fusion Systems come in a 4-channel and an 8-channel system to match the needs of any AV conference room. No systems integrator needed, yielding a lower total cost-of-ownership.

Just plug the Fusion in and enjoy great wireless audio!

Video Conferencing
Revolabs Fusion Wireless Microphone Solution includes all of the necessary cables to plug into any of the major video-conferencing solutions, including Lifesize, Polycom, Sony and Tandberg. It includes a remote control to control the sound volume in your conference room or in the conference room at the far end. Decide on where you want to put the Fusion system, whether you want to place it vertically or horizontally, plug in the cables and you are ready to have great wireless audio in any conference room!

Audio Conferencing
Plug the Fusion Wireless Microphone Solution into a telephone line and you are on your way to great wireless audio. Use the remote control dialer to dial the conference phone number and set up the optional powered speakers to hear the call. If you choose to put the Fusion inside a non-metal cabinet, you must order the Remote IR Sensor.

Each microphone uses its own secure communication channel to maximize quality, security and control. There are two ways to mute the microphones: individual mute control button on each microphone, and by using the remote control. The Fusion Systems are not expandable, so they are limited to four or eight Solo Wireless Microphones, respectively. Additionally, they do not support two-way audio.

SPECICATIONS:

Dimensions

Fusion Base Station: 16.45" (41.8 cm) x 8.46" (21.5 cm) x 3.42" (8.7 cm)

Charger Base: 8.3" (21.1 cm) x 4.3" (10.9 cm) x 1.0" (2.56 cm)

Radio Frequency

North America: 1.92 to 1.93 GHz (UPCS North America)

International: 1.88 to 1.90 GHz (DECT EU)

Fusion Base Station Connectors

IR Remote Serial DB9

CD Programming Serial DB9 for Revolabs use only

Audio Control RJ45 — for Revolabs use only

Telephone Line-In RJ11

Telephone Set-In RJ11

Network RJ45 — for Revolabs use only

XLR male

Aux In RCA Plug

Aux Out RCA Plug

Record Out RCA Plug

Room Out RCA Plug

Conference In RCA Plug

Conference Out RCA Plug

Charger Base Connectors

DC power input port

Proprietary 4 pin microphone charge jacks

Audio Bandwidth: 100-6800 Hz

Power Requirements

Fusion Base Station: 100-240V AC, 50-60 Hz, 5W (Universal Inputs)

Charger Base: 5V DC, 2 Amps (switching power supply varies by country)

Range

100' (30 meters) approx. (no obstructions)

Out-of-range alarm

Channels: 4 or 8 channels per system

Battery

Lithium Polymer

8 hours talk time

Charge Time: 2 hours

Encryption: 128-bit proprietary (per microphone channel)

Environmental Requirements

Temperature: 40° to 100° F (5° to 40° C) operating

Humidity: 20% to 85%

Watch a 4 minute video about the Fusion below:


DOWNLOAD REVOLABS FUSION4 BROCHURE

---

LOOK FOR SIMILAR ITEMS BY CATEGORY ...

CONFERENCING MICROPHONES    LAPEL MICROPHONES    REVOLABS    NEFSIS HARDWARE    WIRELESS MICROPHONES    WIRELESS MICROPHONES