ROLAND VC-1-SC Up/Down/Cross Scan Converter to/from SDI/HDMI with Frame Sync

ROLAND

FREE Ground Shipping

ITEM SHIPS DIRECTLY FROM MANUFACTURER. WE WILL NOTIFY YOU IF IT IS NOT AVAILABLE FOR SHIPMENT.

Roland's new video converters address the demand for high-quality, lossless video and audio converters for live/post production as well as installed systems. They include the Roland VC-1-HS (HDMI to SDI), VC-1-SH (SDI to HDMI), VC-1-DL (Bi-directional SDI/HDMI with audio/video delay and frame sync) and VC-1-SC (Up/Down/Cross Scan converterto/from SDI/HDMI).

The VC-1 Video Converter series provides uncompromising picture quality by maintaining the video characteristics of the original signal. There are no interlacing artifacts or other conversion or signal errors sometimes found with other video converters. The VC-1 series also features an on-board re-clocker to compensate for attenuation of SDI signals carried over long distances. The VC-1 series also supports both level A and B 3G-SDI, letting you connect a variety of higher quality SDI sources. The VC-1-SC also enables input from analog sources such as RGB and component along with built-in scaler.

The VC-1 series is HDCP compliant allowing you to convert or pass-through HDCP signals with the exception of any SDI output. Selectable audio embedding or de-embedding lets you route different audio sources to or from video devices.

  • 3G (Level A and B)/HD/SD SDI In/Out
  • HDMI In/Out
  • RGB/Component In
  • Composite In
  • HDCP support
  • Built-in Frame Synchronizer and Scaler
  • Up/Down/Cross, Frame Rate*, I/P, and Aspect Ratio Conversion
  • Audio embedding or De-embedding
  • PC/Mac Control Application (VC-1 RCS) for deeper level settings control
    * Frame skip/repeat type

    Input Connectors
  • SDI
    Connector: BNC type x 1 (Combined use with SDI Out Connector)
    Signal Standards: SMPTE 424M (SMPTE 425M-AB), SMPTE 292M, SMPTE 259M-C
  • HDMI
    Connector: Type A (19 pins) x 1
    Signal Standard: HDMI HDCP support (When an HDCP-applied signal is input, output from the SDI OUT connector is stopped)
  • RGB/Component
    Connector: HD DB-15 type x 1
    Signal Level: 1.0Vp-p (Y signal), 0.7Vp-p (R/G/B/Pb/Pr signals), 5VTTL (H/V signals)
    Impedance: 75 ohms
  • Composite
    Connector: BNC type x 1
    Signal Level: 1.0 Vp-p (Y signal), 0.286 V-p (C signal (NTSC)), 0.3 V-p (C signal (PAL))
    Impedance: 75 ohms
  • Analog Audio
    Connector: RCA phono type x 1 pair (L/R) (Combined use with Analog Audio Out Connector)
    Input Level: -6dBV
    Maximum Input Level: +6dBV
    Impedance: 22 k ohms
  • Reference
    Connector: BNC type x 1
    Impedance: 75 ohms
    Signal Format: Black Burst, Bi-level, Tri-level

    Output Connectors
  • SDI
    Connector: BNC type x 2 (One is Combined with SDI In Connector)
    Signal Standards: SMPTE 424M (SMPTE 425M-AB), SMPTE 292M, SMPTE 259M-C
  • HDMI
    Connector: Type A (19 pins) x 1
    Signal Standards: HDMI HDCP support
  • Analog Audio
    Connector: RCA phono type x 1 pair (L/R) (Combined use with Analog Audio In Connector)
    Input Level: -6dBV
    Maximum Output Level: +6dBV
    Impedance: 2.2 k ohms

    Formats
  • SDI
    Connector: BNC type x 1 (Combined use with SDI Out Connector)
    Signal Standards: SMPTE 424M (SMPTE 425M-AB), SMPTE 292M, SMPTE 259M-C
    Video Formats: 1920x1080/60p/59.94p/50p/30p/29.97p/25p/24p/23.98p/60i/59.94i/50i
    1920x1080/30PsF/29.97PsF/25PsF/24PsF/23.98PsF (Conforms to SMPTE 274M)
    1280x720/60p/59.94p/50p/30p/29.97p/25p/24p/23.98p (Conforms to SMPTE 296M)
    720x480/59.94i, 720x576/50i (Conforms to ITU-R BT.601-5)
    Color Format: 10 bits YCC 4:2:2
    Audio Format: Linear PCM, 24 bits, 48 kHz, 16 ch (Conforms to SMPTE 299M, SMPTE 272M-C)
    *When frame synchronizer is engaged, CH 3-8 of HDMI and CH 3-16 of SDI audio output are not available.
  • HDMI
    Video Formats: 1920x1080/60p/59.94p/50p/30p/29.97p/25p/24p/23.98p/60i/59.94i/50i
    1280x720/60p/59.94p/50p/30p/29.97p/25p/24p/23.98p
    720x480/59.94p/59.94i, 720x576/50p/50i (Conforms to CEA-861-E)
    PC Formats: 640x480/60/72/75/85Hz, 800x600/56/60/72/75/85Hz, 1024x768/60/70/75/85Hz, 1280x768/60/75/85/Hz, 1360x768/60Hz, 1152x864/75Hz, 1400x900/60/75/85Hz, 1280x960/60/85Hz, 1280x1024/60/75/85Hz, 1400x1050/60/75Hz, 1680x1050/60Hz, 1600x1200/60Hz, 1920x1200/60Hz Reduced blanking (Conforms to VESA DMT Version 1.0 Revision 11)
    Color Format: 10 bits YCC 4:2:2, 8 bits YCC 4:4:4, 8 bits RGB 4:4:4
    Audio Format: Linear PCM, 24 bits, 48 kHz, 8 ch
  • RGB/Component
    Video Formats: 1920x1080/60p/59.94p/50p/60i/59.94i/50i/24PsF/23.98PsF (Conforms to SMPTE 274M)
    1280x720/60p/59.94p/50p (Conforms to SMPTE 296M)
    720x480/59.94p/59.94i, 720x576/50p/50i
    PC Formats: 640x480/60/72/75/85Hz, 800x600/56/60/72/75/85Hz, 1024x768/60/70/75/85Hz, 1280x720/60Hz, 1280x768/60/75/85/Hz, 1360x768/60Hz, 1152x864/75Hz, 1400x900/60/75/85Hz, 1280x960/60/85Hz, 1280x1024/60/75/85Hz, 1400x1050/60/75Hz, 1680x1050/60Hz, 1600x1200/60Hz, 1920x1080/60Hz, 1920x1200/60Hz Reduced blanking (Conforms to VESA DMT Version 1.0 Revision 11)
  • Composite: Video Formats: NTSC, PAL

  • Processing
  • Audio Embed/De-embed: 2ch
  • Frame Synchronizer: Frame sync is activated when a reference signal is detected. When frame synchronizer is engaged, CH 3-8 of HDMI and CH 3-16 of SDI audio output are not available.
  • Resolution Conversion: Selectable Full/LetterBox/Crop/Dot-by-Dot Type
  • Frame Rate Conversion: Frame Skip/Repeat Type

    Others
  • USB: USB Type B (Hi-Speed USB) x 1
  • Power Supply: DC 9 V (AC Adaptor)
  • Operation Temperature: +0--+40 degrees Celsius +41--+104 degrees Fahrenheit
  • Accessories: AC adaptor Power Cord Rubber Foot x 4 Owner's Manual

    Size and Weight
  • Width: 150 mm, 5-15/16 inches
  • Dept: 130 mm, 5-1/8 inches
  • Height: 30 mm, 1-3/16 inchesWeight: 500 g, 1 lbs. 2 oz.