Sony's new XCD-SX910CR progressive scan, IEEE 1394 camera is the latest addition to join Sony's growing line up of digital, high-speed cameras. This new digital camera satisfies the demand for high speed, color, progressive scan cameras and are ideally suited for those customers who need (a) a progressive scan camera that can achieve 30 frames/sec in color; (b) high resolution of 1280 x 1024 in an industrial housing; and, (c) access to the raw pixel values so customers can do their own color processing. The "CR" in its model number stands for "Color Raw". This new "CR" model uses a CCD with a color mask (commonly called a "Bayer filter") and output the "raw color" pixel values in 8 or 10 bit to be converted to a color image on the computer. The color conversion that takes place in the computer is supported by Sony's new IEEE 1394 software and most 3rd party FirewireŽ compatible software (e.g., Matrox, National Instruments and Unibrain).XCDSX910CR FEATURESHigh frame rate and high rate scanning Separate gain for red, green and blue pixels to maximize the color S/N ratio Color conversion process handled by a computer (not by the camera) Multiple Cameras can be synchronized at full frame rate with trigger and will self-synchronize to the common Firewire compatible bus clock Fast software trigger Allows for multiple cameras on a single bus in 8-bit mode (less bandwidth per camera) Binning 1 x 2 and 2 x 2 for high frame rates and high sensitivity in monochrome High shock and vibration resistance
Image Device 1/2 type Progressive Scan CCD Picture Elements 1392 (H) x 1040 (V) Image Size SXGA: 1280 (H) x 960 (V) Max. 1376 (H) x 1024 (V) Lens Mount C Mount Minimum Illumination 4 lx (F0.95 lens open, +18 dB Gain) Digital Interface IEEE 1394-1995 Transfer Rate 400/200 Mbps Frame Rate 15 / 7.5 / 3.75 / 1.875 fps Gain Control Auto/Manual (0 to 18 dB, 0.035 dB steps) External Shutter 1/100,000 to 17.5 s External Trigger Shutter Trigger start (mode 0), trigger start and exposure duration (mode 1) Partial Scan 256 zones (16 x 16) Power Requirements DC 8 to 30 V (from IEEE 1394 camera cable) Power Consumption 4.5W Dimensions 44 (W) x 33 (H) x 116 (D)mm / 1-3/4 x 1-15/16 x 4-5/8 inches) Mass 250 g (9 oz) Operating Temperature -5° C to +45° C (23 to 113° F) Storage Temperature -30 to 60° C (-22 to 113° F) Operating Humidity 20 to 80% (non-condensing) Storage Humidity 20 to 95% (non-condensing) Vibration 10 G (20 to 200 Hz) Shock Resistance 70 G Regulations UL60950 listing, FCC Class B Digital Device, CD (EN61326)
View the XCD-SX910CR Brochure (pdf)
DOWNLOAD SONY XCD-SX910CR BROCHURE
LOOK FOR SIMILAR ITEMS BY CATEGORY ...