SONY CMA-D3 Camera Power Adapter with Y/C and RGB Output for DXC-390 Camera

MANUFACTURER: SONY

PART NUMBER: SONY CMAD3
PRICE: $1,115.95

AVAILABILITY: SPECIAL ORDER - SHIPS IN 1-2 WEEKS

SONY CMA-D3 Camera Power Adapter with Y/C and RGB Output for DXC-390 Camera

SONY CMA-D3 Camera Power Adapter with Y/C and RGB Output for DXC-390 Camera

MANUFACTURER: SONY
PART NUMBER: SONY CMAD3
PRICE: $1,115.95

AVAILABILITY: SPECIAL ORDER - SHIPS IN 1-2 WEEKS


SONY CMAD3

The unit supplies DC power and transmits video and sync signals with the use of CCZ-A and CCMC-3MZ cables (which are sold separately).

The CMA-D3 plugs into standard household 120-volt current and converts to 12-volt DC for the camera's operation. It will also run between the camera and the RM-C950 remote camera function control unit. Long power cable runs up to about 300 feet (100 meters) is possible with the CCDC-100A cable.

The CMA-D3 does more than just supply the correct voltage to run the camera. From the camera's 12-pin input for power, the cable also returns Y/C or RGB video/data signals to the CMA-D3. It can then output video/data to monitor or recorder. A remote controller, the RM-C950, through RS-232C control protocol, can provide camera control including lens zoom, focus and iris control. Picture-look features can also be accessed with the controller.

Input and Output Connectors
  • Video and Power- 26-Pin (x 1)
  • Analog Component Video-3 BNC (x 1 output)
  • Sync- BNC (x 1 input, 1 output)
  • DC Power- Bare Wire-type (x 2 screw connectors)

    LOOK FOR SIMILAR ITEMS BY CATEGORY ...

    SONY