Sony's new XCI-V3 and XCI-V3/XPE cameras are not just another Smart camera. These are industrial cameras with an industrious IQ: a complete PC with a high-end CCD camera in a small, networkable package. Unlike conventional machine vision cameras, images captured by the XCI-V3 and XCI-V3/XPE are processed within the camera and the processed data is directly transmitted to a PC over a network.
The new XCI-V3 camera incorporates a 1/3-type VGA B&W progressive scan CCD and is equipped with a Linux®-based operating system. The XCI-V3/XPE camera also incorporates a 1/3-type VGA B&W progressive scan CCD but comes with Windows® XPe (embedded) operating system. These cameras feature a high-performance AMD Geode GX533 processor, 256MB SDRAM, integrated Compact Flash memory storage and extensive I/O connectivity via Ethernet, USB serial port and monitor out. Both cameras also feature a 3x3 filter that can be used to enhance the edges of an object, improve the contrast so that image details can stand out or for other custom image processing requirements.
These smart cameras are designed to provide OEMs, system integrators and vision tool manufacturers a rugged, robust component, combining the imager, intelligence and interface in a single plug-in module that is simple to set up and easy to integrate for efficient factory workflow. Customers can install a variety of image-processing software applications or develop and apply customized applications to meet specific user needs.HIGHLIGHTS:1/3-type progressive scan CCD with square pixels High-Resolution VGA images (640 x 480) captured at 60 fps High-Performance 400 MHz Geode GX533 processor Built-in Linux Operating System Hardware 3 x 3 Filter External trigger input Trigger delay function C mount Compact and lightweight - 55 (W) x 55 (H) x 110 (D)mm / 400g High shock and vibration resistance
Software Support by Leading Software Vendors
The XCI-V3/XPE and XCI-SX1/XPE Smart cameras are both compatible with, and are supported by, leading software libraries such as Vision Builder AI by National Instruments, Halcon by MVTec, eVision Tools by Euresys and Sapera Processing and Sherlock Software by Dalsa-Coreco. High-Performance 400 MHz Geode GX533 processor
* x86-compatible architecture
* 256 MB main memory (DDR-SDRAM) and 1MB flash memory
* Integrated 128MB Compact Flash memory card for XCI- V3
* Low power consumptionVarious Interfaces
* 10Base-T/100-Base-TX interface for network operation
* Monitor output
* USB1.1 interface
* RS-232C serial interface and digital input/output
Image Device: 1/3 type progressive scan IT monochrome CCD Effective Resolution (H x V): 640 x 480 (VGA) Cell Size (H x V): 7.4 x 7.4 µm Frame Rate: 60 fps (VGA) Gain Control: Manual (0 o +18 dB, 1 dB steps) Electronic Shutter: 2 to 1/50,000 s (trigger mode), 2 to 1/100,000 s (free run mode) Binning Function: Vertical/Horizontal Binning Partial Scan Function - Vertical Random Scanning: 30 to 480 lines, 30 line steps Partial Scan Function - Horizontal Random Scanning: 192 to 640 lines, 64 pixel steps Partial Scan Function - Typical Frame Rate: 300 fps (30 lines) External Trigger Input: Pulse-edge detection mode/Pulse-width detection mode External Trigger Input Voltage: Low: 0 to +0.5V, High: 4.5V to +24V Trigger Delay Function: 0 to 4 s, 1 ms steps Strobe Delay to Start Exposure: -67 µs to +60 µs, 1 µs step External Trigger Latency: Less than 10 µs Hardware Look Up Table: Gamma compensation, Binarization negative/positive reserve, etc. Hardware 3 x 3 Filter: Edge Detection, sharpness, etc. CPU: x86 AMD Geode GX533, 400 MHz Memory: 256 MB DDR-SDRAM, 128 MB Compact Flash Operating System: Monta Vista Linux Professional Edition 3.0 Ethernet: 100Base-TX/Base-T (Network protocols: TCP/IP (Pv4), HTTP, FTP) Monitor Output: D-Sub 15pin for multi scan monitor USB: Version 1.1 Serial Interface: RS-232C Digital I/Os: TTL IN/OUT, isolated IN/OUT, trigger IN, Exposure Out Lens Mount: C Mount Minimum Illumination: 1lx (F1.4, +18dB gain) Power Requirements: 10.5 to 26.4 V Power Consumption: 7.5W Dimensions (W x H x D): 55 x 55 x 110 mm (2-1/4 x 2-1/4 x 4-3/8 in) Weight: 400 g (14 oz) Operating Temperature: 23 to 113°F (-30°C to +60°C) Storage Temperature: -22 to +140°F (-30 to +60°C) Operating Humidity: 20 to 80% non-condensing Storage Humidity: 20 to 95% non-condensing Vibration Resistance: 10 G (20 to 200 Hz) Shock Resistance: 70G Regulations: FCC / CE / IC / VCCI Class A
DOWNLOAD SONY XCIV3 BROCHURE
LOOK FOR SIMILAR ITEMS BY CATEGORY ...