TRIPP LITE B126-4X4
Tripp Lite B126-4X4 allows Four HDMI video sources ( DVR, Cable box, etc ) to be shared among multiple monitors, over ordinary Cat5e/Cat6 cable. When used with Tripp Lite Active HDMI receivers, can extend a 1080P signal up to 125ft, and 1080i up to 175ft. Allows any Input to be routed to any Output; or the same Input to be routed to multiple outputs. Four monitors can be supported with the basic switch...further expand the range and number of monitors by adding B126-110 remote repeater units. Switch is HDCP compliant, and is Plug-and-Play...no software or drivers required.Share multiple HDMI sources between multiple monitorsAllows any input to be routed to any output; or the same input to be routed to multiple outputsTransmits the signal over one Cat5e/6 cable to a remote monitor up to 175 ft. awayA B126-Series remote receiver is needed at each monitorFor longer distances: Use a B126-1A0 or B126-1A0-WP-1 active remote receiver to extend a 1080p @ 60Hz signal up to 125 ft. from the transmitter (or a 1080i @ 60Hz signal up to 175 ft. from the transmitter)For shorter distances: Use a B126-1P0 or B126-1P0-WP-1 passive remote receiver to extend a 1080p @ 60Hz signal up to 50 ft. from the transmitter (or a 1080i @ 60Hz signal up to 75 ft. from the transmitter)Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite's N202-Series, to achieve maximum distance and resolutionFurther expand the range and number of monitors by adding B126-110 remote repeater unitsAdd up to three repeaters on each channel of the matrix switch, for a total of 4 displays per channel (An active remote receiver should be the last unit in a channel)A 1080p @ 60Hz signal can be extended up to 125 ft. for each repeater added into a channel (or up to 175 ft. for a 1080i @60Hz signal)Switch between inputs via pushbuttons, remote control,or RS232 serialHDCP-compatibleMounting hardware includedPlug-and-play; no software or drivers requiredCompatible with all operating systemsCompliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Package IncludesB126-4X4 Transmitter UnitExternal Power Supply (Input: 100-240V, 50/60Hz, 0.5A Output B126-2X2: 5V, 2A3.5 mm to DB9 Adapter Cable ( serial )Mounting HardwareRemote ControlOwner's Manual
LOOK FOR SIMILAR ITEMS BY CATEGORY ...