C2-2250A Advanced Features - In addition to all standard C2-2200A features. The Key Mode allows computer graphics to be keyed over an external Composite or YC signal. The keyed image may be faded in and out. Due to the 4:4:4 sampling format, precise keying at the pixel level can be achieved. The Mix Mode permits Seamless Cut, Fade or Wipe transitions between input sources. The PIP Mode allows either of the computer inputs to be inset in a window over the other inputs.The PIP window may be placed anywhere on the screen. The Edge Blending feature allows feathering any or all of the edges; multiple images can be aligned vertically, horizontally, or both to create unusual displays. Using multiple units, any number of images can be blended. Gamma correction is employed to compensate for many of the problems faced when blending projectors. Special preparation of the video in advance is not necessary, since all processing is done within the unit. The Genlock feature insures precise synchronization of the incoming signals. The C2-2255A provides an SD/HD-SDI Input as well as all the other features of the C2-2250A.
Input Expansion is possible by using the optional S2 Series Input Expansion Switchers for SD/HD-SDI, DVI, RGB, YPbPr, YUV, Composite or YC. These units link to C2 unit via an OPTIONS Interconnect Cable and become an integral part of the main unit from a control and operational standpoint. The routing of these additional inputs is controlled directly from the control system of the C2 unit and multiple different S2 models may be simultaneously connected.
Basic Stereo Audio switching is provided by an integral 4x1 audio routing switcher. The four impedance-independent, unbalanced inputs follow the video input selection. A rear panel terminal block provides input and output access.
Advanced Stereo Audio is available via the optional S2-106AD Input Expansion Switcher, providing six differential audio inputs, which can be used for low impedance balanced or high impedance unbalanced sources. The user controls audio level, audio sampling frequencies and up to 999ms of adjustable audio delay independently for each input. The unit has numerous choices for audio I/O connectors, including a terminal block. The S2-106AD connects to the C2 unit via the OPTIONS interconnect cable and is then fully integrated into the control system of the host unit.
FEATURES:Inputs: 2xCV, 2xYC, YUV/YPbPr, DVI-D, plus SD/HD-SDI on models C2-2205A and C2-2255AOutputs: DVI-I and Analog RGB/YPbPr (All units)Analog: PC to 2048x2048, HDTV to 1080p/60DVI: PC to 1920x1200, HDTV to 1080p/60Supports: NTSC, PAL, PAL-M, PAL-N, SECAMMotion Compensation & 3:2 PulldownTemporal Interpolation & Diagonal InterpolationAutomatic Incoming Resolution Detection4:4:4 Full bandwidth Chroma SamplingVideo signal parameter adjustmentsIntegral 4x1 Stereo Audio Routing SwitcherRS-232 and IP Interface & Windows Control PanelVariable Image Zoom to 10X and Shrink to 10%Mix, PIP, Chroma/Lumakey, Genolock & Edge Blending on models C2-2250A and C2-2255AOptional IR Remote Control UnitOptional Single/Dual Rackmount KitOptional Input Expansion with S2 Switchers
DOWNLOAD TVONE C2-2255A PRODUCT MANUAL
DOWNLOAD TVONE C2-2255A BROCHURE
LOOK FOR SIMILAR ITEMS BY CATEGORY ...