High Definition Pan/Tilt/Zoom Camera System based on the Sony BRC-Z700.
The Vaddio WallVIEW PRO Z700 (Figure 1) is built
around the Sony BRC-Z700 high definition PTZ Camera
with three ¼-type CMOS 1.1 megapixel image sensors.
The WallVIEW PRO Z700 uses high speed differential
signaling (HSDS), an active transmission system to
deliver superior video quality over Cat. 5 cabling
distances up to 500 feet.
The WallVIEW PRO Z700 system is capable of 1080i
HD 16:9 resolution in NTSC or PAL. Simultaneous SD
video out (crop, squeeze or letterbox) is available
simultaneously but requires an additional Cat. 5 cable
and two Vaddio Quick-Connect boxes.
The WallVIEW PRO system also has many new features, including a unique IR forwarding system which
allows the user to forward IR commands from third party IR remote controls, through the WallVIEW system to
a third party device. In addition the system also has auto camera resolution sensing, analog component
video outputs (Y,Pb, Pr), four position distance adjustment for Cat. 5 cabling, Y-Gain adjustment, 1-RU rack
mount Quick-Connect™ PRO System with HSDS, and the EZ Interface Module (EZIM) that fastens to the
back of the camera mount. Like all Vaddio WallVIEW systems, the Thin Profile Wall Mount and mounting
hardware is included.
One (1) - Sony BRC-Z700 High Definition PTZ Camera
One (1) - Vaddio EZ Interface Module (EZIM)
One (1) - Vaddio EZIM to HD camera break out cable
One (1) - Vaddio Quick-Connect PRO with HSDS (1-RU Rack Mountable)
One (1) - Vaddio Thin Profile Z700 Wall Mount
One (1) - IR Remote Controller
One (1) - EZCamera Control Adapter (RJ-45 to DB-9)
One (1) - 36V PowerRite™ HD Power Supply with AC Cord Set
One (1) - 2-position Phoenix Connector for IR
Documentation - Vaddio Manual,Sony BRC-Z700 Manual
DOWNLOAD VADDIO 999-6805-000 PRODUCT MANUAL
DOWNLOAD VADDIO 999-6805-000 BROCHURE