TRIO AUDIO Vaddio TRIO Table and Ceiling Microphones incorporate SmartMic technology along with built-in DSPs for the ultimate in simple control and maximum performance. The technologyintegrates automatic microphone mixing, wideband echo cancellation, noise reduction, and automated gain control into the microphones and eliminatesthe need for super expensive, hard to program and hard to operate conferencing mixers.
Like many Vaddio products, a simple Cat-5 cable connection and no clumsy software configuration makes the TRIOmicrophones as simple to install as traditional boundary or celling microphones. The TRIO Mic I/O connects up to four (4)TRIO Mic Arrays over Cat-5 cables. The Cat-5 cable carries power to the microphone and returns the processed audio fromthe TRIO Mic. The TRIO Mic I/O has four (4) individual line level balanced outputs, eachrepresenting the echo canceledaudio channel from the individual TRIO mics. An AEC referenceinput channel is provided on the rear panel for connection tothe far-end audio signal coming into the conference room. TheAEC Reference channel is required for the TRIO mic to cancelout the far-end audio from going into the room mics and echoing back to the far-end
The TRIO Table and Ceiling Mic Arrays each have three (3) mic elements providing a 360º pickup pattern and connect to theTRIO Mic I/O with a Cat-5 cable. The TRIO Ceiling Mic has a plenum safe sealed enclosure for the electronics and a 36”(914.4mm) adjustable drop cable to a 2.5”(63.5mm) spherical shaped mic array. The TRIO Ceiling Mics come in either a darkcharcoal or a white version. The combination of the TRIO MicI/O, the TRIO Table Mics or the TRIO Ceiling Mics, turns anymixer into an automatic mixer with wideband echo cancellation, noise reduction, and automated gain control.