MAGEWELL 64010 Pro Convert HDMI 4K Plus

MAGEWELL

FREE Ground Shipping

IN STOCK

The Pro Convert family easily and reliably converts video signals such as HDMI and SDI into NDI streams. These NDI streams will be available to all NDI-compatible software and systems on the same network regardless of physical distance, ensuring high-quality, low-latency, IP-based live production experiences superior to traditional live production solutions.

Pro Convert devices automatically detect your network and the video input signal format, with no manual network configuration nor source format selection needed. Plug in the cables, and it just works!

Simply connect a Pro Convert device to your existing video source to make your production workflow IP-enabled. The converter provides a loop-through interface so you can still connect your source to the same subsequent video equipment without affecting your original workflow, minimizing cost and integration effort.

Computers in the same LAN can access the video camera connected to the Pro Convert. Users can remotely control the pan/tilt/zoom movement of the video camera using the PTZ control function. Preset positions can be set for convenient control.

  • Convert one channel of HDMI signal with embedded audio to NDI® stream
  • Loop-through one channel of HDMI signal with embedded audio

    Supported Web Browser (tested)

    Microsoft Internet Explorer 11
    Microsoft Edge
    Mozilla Firefox version 61 and above
    Google Chrome version 49 and above
    Apple Safari 11.1 and above
    Opera 55.0.2994.44 and above

    Supported Software (tested)

    OBS
    XSplit
    vMix
    VidBlasterX
    Wirecast
    streamstar SW
    mimoLive
    Any other NewTek NDI-enabled encoding or streaming software

    Input Interfaces

    HDMI
    – DVI-D 1.0
    – HDMI 1.4
    – HDMI 2.0

    Loop through Interface

    HDMI
    – DVI-D 1.0
    – HDMI 1.4
    – HDMI 2.0

    Storage Interface

    SD Card (functions to be developed)

    PTZ + Tally Control

    Mini-DIN–8 jack

    Screw Mounting Hole

    ¼–20 mounting hole

    Network Interfaces

    10/100/1000Mbps Ethernet
    IEEE 802.3af PoE

    USB Interface

    USB2.0 Type B
    5V/2.1A power supply
    USB RNDIS/ECM

    Input Feature

    Support for input video resolutions up to 4:4:4 8-bit 4096×2160 60fps

    HDMI Specific Features

    600MHz HDMI receiver
    Adaptive HDMI equalizer
    Support for customized EDID
    Support for extraction of AVI/Audio InfoFrames
    Full colorimetry support
    Support for up to 4096×2160 4:4:4 60fps input signals
    Support for 8 channel IEC60958 audio streams
    Support for extraction of audio formation information & channel status data
    Support for extraction of video timing information
    Support for extraction of 3D format information
    Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.

    NDI Output Format

    Support for 4:2:2 8-bit output
    Support for up to 4096×2160 60fps or 1920×1080 240fps
    Support for NDI 3.x

    Video Processing Features

    Video processing pipelines with 4096×2160 60fps
    Video brightness, contrast, saturation, hue adjustment
    Video de-interlacing
    – Top field only
    – Bottom field only
    Video aspect ratio conversion
    – Auto or manual selection of output aspect ratio
    Video color format conversion
    – Auto or manual selection of input color format & quantization range
    – Auto or manual selection of output color format, quantization range & saturation range
    – Support for RGB, YUV BT.601, YUV BT.709, YUV BT.2020 input color formats
    – Support for YUV BT.601, YUV BT.709, YUV BT.2020 output color formats
    – Support for Limited or Full quantization range
    – Support for Limited, Full & ‘Extended gamut’ saturation range
    Video frame rate conversion
    Video mirror flip

    NDI Source Name

    Support for setting the device name shown in the system using Web UI. By default, the device name is ‘Pro Convert’.
    Support for setting the source name shown in the system using Web UI. By default, the source name is ‘board-index + serial number’.
    Support for setting board-index, from 0 to F, through on-board rotary switch

    Firmware Upgrade

    Support for manual update using Web UI

    LED Indicator

    Status LEDs indicate:
    – the state of power supply: on/off
    – Tally: preview/program
    – the state of input signal: locked/unlocked
    – the state of loopthrough signal: loopthrough connected and signal detected/undetected

    Form Factor

    117.5mm (L) x 66.7mm (W) x 23.4mm (H)

    Accessories

    USB2.0 A to B Cable
    5V/2.1A power adaptor
    Mini-DIN–8 (PTZ + TALLY) to RS232 (PTZ) + Mini-DIN–8 (TALLY)

    Power Consumption

    5V max current: ~2A
    Max power consumption: ~10W

    Working Environment

    Operating temperature: 0 to 45 deg C
    Storage temperature: –20 to 70 deg C
    Relative Humidity: 5% to 90% non-condensing