MAGEWELL 64040 Pro Convert SDI Plus

MAGEWELL

FREE Ground Shipping

IN STOCK

One-channel HD Signal Converter

  • Convert one channel of SD/3G-SDI signal with embedded audio to NDI® stream
  • Loop-through one channel of SD/3G-SDI signal with embedded audio


  • Supported Web Browser

    • Microsoft Internet Explorer 11
    • Microsoft Edge
    • Mozilla Firefox version 61 and above
    • Google Chrome version 49 and above
    • Apple Safari 11.1 and above
    • Opera 55.0.2994.44 and above

    Supported Software

    • OBS
    • XSplit
    • vMix
    • VidBlasterX
    • Wirecast
    • streamstar SW
    • mimoLive
    • Any other NewTek NDI-enabled encoding or streaming software

    Input Interfaces

    • BNC
      • SD/HD/3G SDI

    Loop-through Interface

    • BNC
      • SD/HD/3G SDI

    Storage Interface

    • SD Card (functions to be developed)

    PTZ + TALLY Control

    • Mini-DIN–8 jack

    Screw Mounting Hole

    • ¼–20 mounting hole

    Network Interfaces

    • 10/100/1000Mbps Ethernet
    • IEEE 802.3af PoE

    USB Interface

    • USB2.0 Type B
    • 5V/2.1A power supply
    • USB RNDIS/ECM

    Input feature

    • Support for up to 2048x1080 60fps input resolution

    SDI Specific Features

    • Integrated cable equalizer supporting cable lengths up to 150M for 3G-SDI signals
    • Support for SD/HD/3Ga/3Gb/3Gb-DL/3Gb-DS (SMPTE 2081) standards
    • Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
    • Support for 10/12-bit color depth
    • Support for extraction of SMPTE 352 payload identifier
    • Support for up to 16 (mono) audio channels
    • Support for extraction of audio formation information & channel status data
    • Limited support of 3Gb-DS: only the first stream can be captured
    • Limited support for capture of the first link of dual link interfaces:
      • YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60
      • YCbCr 4:4:4 10-bit: captured as 4:2:2
      • RGB 4:4:4: R/B sub-sampled

    NDI® Output Format

    • Support for 4:2:2 8-bit output
    • Support for up to 2048x1080 60fps output resolution
    • Support for NDI 3.x

    Video Processing Features

    • Support for capture resolutions up to 2048x1080
    • Video brightness, contrast, saturation, hue adjustment
    • Video de-interlacing
      • Top field only
      • Bottom field only
    • Video aspect ratio conversion
      • Auto or manual selection of output aspect ratio
    • Video color format conversion
      • Auto or manual selection of input color format & quantization range
      • Auto or manual selection of output color format, quantization range & saturation range
      • Support for RGB, YUV BT.601, YUV BT.709, YUV BT.2020 input color formats
      • Support for YUV BT.601, YUV BT.709, YUV BT.2020 output color formats
      • Support for Limited or Full quantization range
      • Support for Limited, Full & ‘Extended gamut’ saturation range
    • Video frame rate conversion
    • Video mirror flip

    NDI® Source Name

    • Support for setting the device name shown in the system using Web UI. By default, the device name is ‘Pro Convert’.
    • Support for setting the source name shown in the system using Web UI. By default, the source name is ‘board-index + serial number’.
    • Support for setting board-index, from 0 to F, through the on-board rotary switch

    Firmware Upgrade

    • Support for manual update using Web UI

    LED Indicator

    • Status LEDs indicate the working state of the device:
      • Power supply: on/off
      • Tally: preview/program
      • Input signal: locked/unlocked
      • Loopthrough signal: loopthrough connected and signal detected/undetected

    Form Factor

    • 117.5mm (L) x 66.7mm (W) x 23.4mm (H)

    Accessories

    • USB 2.0 A to B Cable
    • 5V/2.1A power adaptor
    • Mini-DIN–8 (PTZ + TALLY) to RS232 (PTZ) + Mini-DIN–8 (TALLY)
    • Tally lights
    • L-bracket
    • LED matrix panel (optional)

    Power Consumption

    • 5V max current: ~1.5A
    • Max power consumption: ~6W

    Working Environment

    • Operating temperature: 0 to 45 deg C
    • Storage temperature: –20 to 70 deg C
    • Relative Humidity: 5% to 90% non-condensing