Use AvediaStream Encoders for any building, campus or metropolitan area in which video or decrypted TV are required, without the added expense of a separate cable network solely for TV.
Use your existing IP network to distribute video from cameras or DVD/Blu-ray players, or TV from set-top boxes.Encode Standard Definition (SD) and High Definition (HD) video and audio into MPEG streams Add display devices and users without degrading picture quality Control video and TV access
The AvediaStream e2320 encoder streams video (news, sports, entertainment, educational) channels over your existing network. It encodes and distributes content from a wide range of sources such as DVD Players, set top boxes and digital cameras to an IP network. The e2320 is a dual encoder so can stream simultaneously from two independent video sources. Outputs MPEG-2 Transport Stream over UDP or RTP as IP multicast or unicast stream Dual encoder in single blade for cost-effective installations MPEG-2 or H.264 video encoding SD or Sub-SD encoding Video inputs: Composite, SD Component, RGBS, S-Video Audio inputs: Unbalanced Stereo Hot swap blade allows quick and non-intrusive upgrade to existing installations using Exterity chassis options (c1101, c1103, c1110) Embedded system for high reliability and low power consumption
TECHNICAL SPECIFICATIONS
InterfacesVideo Input: Dual inputs providing Composite (RCA), Component (RCA), S-Video (RCA) and RGBS (RCA) (only channel A can input RGBS) 1V p-p 75Ω
Audio Input: Unbalanced Line Level stereo (3.5mm jack socket) 2V p-p 75Ω
IR out (3.5mm jack socket- not enabled at this firmware release)802.3 10/100BaseT Ethernet (RJ45 chassis socket)
Serial RS232 Port for local administration (RJ45 chassis socket)
Streaming Single program MPEG-2 transport streams (ISO/IEC 13818-1) RTP UDP IP unicast IP multicast IGMP Join Group for enhanced switch compatibility Up to 80Mbps total stream output
Management Fully integrated with Exterity management tools Network administration via SSH, Telnet and SNMP HTTP web interface (Supported browsers Firefox, Internet Explorer (IE8 onwards) and Chrome) Serial RS232 Admin Port Telnet Control Interface (TCI) Event logging via Syslog (local and remote) Firmware upgrade via TFTP Configuration backup/restore via TFTP
Channel Management Channel announcement via SAP/SDP Up to ten simultaneous stream destinations Multicast/unicast address selection (automatic or manual) Configurable name, number and group membership
Video Input PAL, SECAM, NTSC auto-switching Resolutions supported: 525i (480i) 60Hz and 625i (576i)50Hz 4:3 / 16:9 aspect ratio Wide Screen Signalling for automatic aspect ratioswitching
Video Encoding MPEG-4 part 10 H.264 (ISO/IEC 14496-10) High Profile @ Level 3 (profile user configurable) MPEG-2 (ISO/IEC 13818-2) Main Profile @ Main Level Configurable GOP structure option with all encodingprofiles
Output Video Resolution: 525i input: SQCIF (128x96p), QVGA (320x240p), SIF(352x240p), 525i (720x480i) 625i input: SQCIF (128x96p), QVGA (320x240p), CIF/SIF(352x288p), 625i (720x576i) Bit rate: 128kbps — 15Mbps Frame rate: 12Hz — 60Hz Constant or variable bit rate
Audio Encoding MPEG-1 Layer II (ISO/IEC 11172-3) Stereo encoding bit rate 64kbps — 384kbps Mono encoding bit rate 48kbps Audio sampling rate 48kHz
System CPU: ARC 500MHz RAM: 512MB Flash: 128MB (for firmware and configuration) OS: Linux 2.6
Network Linux IPv4 stack DHCP or Static IP addressing IEEE 802.3u 10/100Mbps MDIX Ethernet
Protocols IP (RFC 791), UDP (RFC 768), TCP (RFC 793), ARP (RFC 826),DNS (RFC 1035), DHCP (RFC 2131), ICMP (RFC 792), IGMP(RFC 3376), TFTP (RFC 1350), HTTP (RFC 2616), Telnet (RFC318) Syslog (RFC 3164), NTP (RFC 1305), SAP (RFC 2974), SDP(RFC 4566), RTP (RFC 3550), SNMP (v1, v2c -RFC 1901)
Regulatory
CE EN55022: 2010, EN61000-4-2: 1995 + A1 +A2, EN61000-4-3: 1996, EN61000-4-4: 1995,EN61000-4-6: 1996, EN55024:2003, IEC 60950-1:2005 (Second Edition), Am 1: 2009
UL/CSA 47CFR: 2008 Part 15, Sub Part B, ANSI C63-4: 2003 CAN/CSA C22.2 No. 0-M, CAN/CSA C22.2 No.60950-1-07, UL 60950-1, 2nd Edition
Environment Operating: 0 ...+40°C / +32 ... +104°F Storage: -20 ...+70°C / -4 ... +158°F Operating and storage Relative Humidity: 10-90% (non-condensing)
Physical Format
Modular hot swap blade for Exterity chassis AvediaStream c1101 providing up to 2 inputs AvediaStream c1103 providing up to 6 inputs AvediaStream c1110 providing up to 20 inputs
Dimensions L: 275mm x W: 130mm x H: 40mm
Power DC 24V: 10W Typical, 12W Maximum
Weight 0.5kg
Use your existing IP network to distribute video from cameras or DVD/Blu-ray players, or TV from set-top boxes.
The AvediaStream e2320 encoder streams video (news, sports, entertainment, educational) channels over your existing network. It encodes and distributes content from a wide range of sources such as DVD Players, set top boxes and digital cameras to an IP network. The e2320 is a dual encoder so can stream simultaneously from two independent video sources.
TECHNICAL SPECIFICATIONS
InterfacesVideo Input:
Audio Input:
IR out (3.5mm jack socket- not enabled at this firmware release)802.3 10/100BaseT Ethernet (RJ45 chassis socket)
Serial RS232 Port for local administration (RJ45 chassis socket)
Streaming
Management
Channel Management
Video Input
Video Encoding
Output Video Resolution:
Audio Encoding
System
Network
Protocols
Regulatory
CE
UL/CSA
Environment
Physical Format
Modular hot swap blade for Exterity chassis
Dimensions
Power
Weight