Step-by-Step Guide to Set-up Preset Positions on the GOHD20U Camera with the IR Remote

Following is a step-by-step guide to setting up preset positions on our GOHD20U HD USB PTZ camera with the included IR remote control:

  1. Move the camera to a desired position
  2. Press [PRESET] and then [1]
  3. Move the camera to a different location
  4. Press [PRESET] and then [2]
  5. Move the camera to yet another different location
  6. Press [PRESET] and then [3]

and so on…

 

To recall positions, simply press the number related to the position you wish to recall (e.g. press [2] to recall position 2).

It's that easy ;-)