MAGEWELL 11150 Pro Capture HDMI 4K Plus


FREE Ground Shipping


One channel UHD capture card
  • HDMI plus embedded audio

    Supported OS
    • Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64)
    • Linux (V4L2 kernel driver source code under NDA, supports x86, x64 & arm architecture)
    • OS X 10.9–10.11
    • macOS 10.12
    Supported APIs
    • Windows
      • DirectShow
      • DirectKS
      • Wave API/DirectSound/WASAPI
    Supported Software
    • VLC
    • VirtualDub
    • OBS
    • XSplit
    • vMix
    • VidBlaster
    • Wirecast
    • Microsoft Media Encoder
    • Adobe Flash Media Encoder
    • Any other DirectShow/V4L2 encoding/streaming software
    Input Interfaces
    • HDMI
      • DVI-D 1.0
      • HDMI 2.0
    Host Interfaces
    • PCIe Gen2 x4
    Input Features
    • Support for input video resolutions up to 4096×2160 pixels
    HDMI Specific Features
    • 594MHz HDMI receiver
    • Adaptive HDMI equalizer
    • Support for customized EDID
    • Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames
    • Full colorimetry support
    • Support for 8/10/12-bit color depths
    • Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
    • Support for up to 8-channel IEC60958/IEC61937 audio streams
    • Support for extraction of audio formation information & channel status data
    • Support for extraction of video timing information
    • Support for extraction of 3D format information
    • Support for extraction of Sony/Canon DSLR time code
    • Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode
    Video Capture Formats
    • Support for capture image resolutions up to 4096×2160 pixels
    • Support for capture frame rates up to 144fps. (Actual capture frame rate can be limited by PCIe bandwidth & image resolution)
    • Support for 4:2:0 8-bit capture formats: NV12, I420, YV12
    • Support for 4:2:2 8-bit capture formats: YUY2, YUYV, UYVY
    • Support for 4:4:4 8-bit capture formats: V308, IYU2, V408, BGR24, BGR32
    • Support for 4:4:4 10-bit capture formats: V410, Y410
    • More capture formats are supported via Pro Capture SDK for DirectKS
    Video Processing Features
    • Two video processing pipelines with ~720Mpixels/s processing bandwidth
    • Full 10-bit video processing
    • Video cropping
    • Video scaling
    • Video de-interlacing
      • Weave
      • Blend top & bottom field
      • Top field only
      • Bottom field only
    • Video aspect ratio conversion
      • Auto or manual selection of input aspect ratio
      • Auto or manual selection of capture aspect ratio
      • Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)
    • Video color format conversion
      • Auto or manual selection of input color format & quantization range
      • Auto or manual selection of capture color format, quantization range & saturation range
      • Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
      • Support for Limited or Full quantization range
      • Support for Limited, Full & ‘Extended gamut’ saturation range
    • Video frame rate conversion
    • Video OSD composition
      • Support for PNG OSD image (up to 4096×2160)
      • Support for dynamic loading of RGBA OSD image via SDK
    Multiple Cards per System
    • Support for multiple cards plugged to one system
    • On-board rotary switch to set card number, with 16 positions from 0 to F
    • System hardware device tree will display “01: Pro Capture HDMI 4K+” when rotary switch is set to 1, and so on
    • The video and audio device names displayed in your software will include the card number (set by the rotary switch)
    Multiple Capture Streams
    • Unlimited capture streams for any one input channel
    • Independent cropping, aspect ratio, color format, resolution, frame rate, de-interlacing and color adjustment settings for each individual stream
    Ultra Low Latency Support
    • Latency of 64 video lines
    • Partial notification mode in SDK
    Timestamp &A/V Synchronization
    • Hardware based 100ns high resolution clock
    • Audio frames (192 audio samples) & video frames are stamped with hardware clock
    • Hardware clock can be synchronized across cards (via SDK)
    Video Capture SG-DMA
    • ~1600MB/s per channel DMA bandwidth in PCIe 2.x system
    • ~800MB/s per channel DMA bandwidth in PCIe 1.x system
    • Support for auto detection of Intel tiled GPU surface
    • Support for DirectGMA for AMD video adapter chipsets
    • Support for GPUDirect for Nvidia video adapter chipsets
    • Pro Capture SDK for DirectShow for easy integration (Windows)
    • Pro Capture SDK for DirectKS for maximum flexibility & performance (Windows)
    Windows Driver Tweaks
    • All options can be controled by three levels of registry key: global level, product level and device level
    • Video,Audio, Crossbar filter names can be customized via registry keys
    Firmware Upgrade
    • Multiple cards in one system can be upgraded simultaneously
    • Cards can be upgraded without a system power shutdown (In most cases, even a reboot is not needed)
    LED Indicator
    • Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed.
    Form Factor
    • Low profile PCIe x4 Add-on Card
    • 140mm x 68.88mm (without PCI bracket)
    Power Consumption
    • Max current at 12V TBD
    • Max current at 3.3V TBD
    • Max power consumption TBD
    Working Environment
    • Operating temperature: 0 to 40 deg C
    • Storage temperature: –20 to 70 deg C
    • Relative Humidity: 5% to 90% non-condensing