The Pro Convert family easily and reliably converts video signals such as HDMI and SDI into NDI streams. These NDI streams will be available to all NDI-compatible software and systems on the same network regardless of physical distance, ensuring high-quality, low-latency, IP-based live production experiences superior to traditional live production solutions.
Pro Convert devices automatically detect your network and the video input signal format, with no manual network configuration nor source format selection needed. Plug in the cables, and it just works!
Simply connect a Pro Convert device to your existing video source to make your production workflow IP-enabled. The converter provides a loop-through interface so you can still connect your source to the same subsequent video equipment without affecting your original workflow, minimizing cost and integration effort.
Computers in the same LAN can access the video camera connected to the Pro Convert. Users can remotely control the pan/tilt/zoom movement of the video camera using the PTZ control function. Preset positions can be set for convenient control.
Convert one channel of HDMI signal with embedded audio to NDI® stream
Loop-through one channel of HDMI signal with embedded audio
| Supported Web Browser (tested) |
Microsoft Internet Explorer 11
Microsoft Edge
Mozilla Firefox version 61 and above
Google Chrome version 49 and above
Apple Safari 11.1 and above
Opera 55.0.2994.44 and above
|
| Supported Software (tested) |
OBS
XSplit
vMix
VidBlasterX
Wirecast
streamstar SW
mimoLive
Any other NewTek NDI-enabled encoding or streaming software
|
| Input Interfaces |
HDMI
– DVI-D 1.0
– HDMI 1.4
– HDMI 2.0
|
| Loop through Interface |
HDMI
– DVI-D 1.0
– HDMI 1.4
– HDMI 2.0
|
| Storage Interface |
SD Card (functions to be developed)
|
| PTZ + Tally Control |
Mini-DIN–8 jack
|
| Screw Mounting Hole |
¼–20 mounting hole
|
| Network Interfaces |
10/100/1000Mbps Ethernet
IEEE 802.3af PoE
|
| USB Interface |
USB2.0 Type B
5V/2.1A power supply
USB RNDIS/ECM
|
| Input Feature |
Support for input video resolutions up to 4:4:4 8-bit 4096×2160 60fps
|
| HDMI Specific Features |
600MHz HDMI receiver
Adaptive HDMI equalizer
Support for customized EDID
Support for extraction of AVI/Audio InfoFrames
Full colorimetry support
Support for up to 4096×2160 4:4:4 60fps input signals
Support for 8 channel IEC60958 audio streams
Support for extraction of audio formation information & channel status data
Support for extraction of video timing information
Support for extraction of 3D format information
Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.
|
| NDI Output Format |
Support for 4:2:2 8-bit output
Support for up to 4096×2160 60fps or 1920×1080 240fps
Support for NDI 3.x
|
| Video Processing Features |
Video processing pipelines with 4096×2160 60fps
Video brightness, contrast, saturation, hue adjustment
Video de-interlacing
– Top field only
– Bottom field only
Video aspect ratio conversion
– Auto or manual selection of output aspect ratio
Video color format conversion
– Auto or manual selection of input color format & quantization range
– Auto or manual selection of output color format, quantization range & saturation range
– Support for RGB, YUV BT.601, YUV BT.709, YUV BT.2020 input color formats
– Support for YUV BT.601, YUV BT.709, YUV BT.2020 output color formats
– Support for Limited or Full quantization range
– Support for Limited, Full & ‘Extended gamut’ saturation range
Video frame rate conversion
Video mirror flip
|
| NDI Source Name |
Support for setting the device name shown in the system using Web UI. By default, the device name is ‘Pro Convert’.
Support for setting the source name shown in the system using Web UI. By default, the source name is ‘board-index + serial number’.
Support for setting board-index, from 0 to F, through on-board rotary switch
|
| Firmware Upgrade |
Support for manual update using Web UI
|
| LED Indicator |
Status LEDs indicate:
– the state of power supply: on/off
– Tally: preview/program
– the state of input signal: locked/unlocked
– the state of loopthrough signal: loopthrough connected and signal detected/undetected
|
| Form Factor |
117.5mm (L) x 66.7mm (W) x 23.4mm (H)
|
| Accessories |
USB2.0 A to B Cable
5V/2.1A power adaptor
Mini-DIN–8 (PTZ + TALLY) to RS232 (PTZ) + Mini-DIN–8 (TALLY)
|
| Power Consumption |
5V max current: ~2A
Max power consumption: ~10W
|
| Working Environment |
Operating temperature: 0 to 45 deg C
Storage temperature: –20 to 70 deg C
Relative Humidity: 5% to 90% non-condensing
|
