MAGEWELL 64050 Pro Convert HDMI TX


FREE Ground Shipping


One-channel HD Signal Converter

  • Convert one channel of HDMI signal with embedded audio to NDI® stream

  • Supported Web Browser (tested)

    • Microsoft Internet Explorer 11
    • Microsoft Edge
    • Mozilla Firefox version 61 and above
    • Google Chrome version 49 and above
    • Apple Safari 11.1 and above
    • Opera 55.0.2994.44 and above

    Supported Software (tested)

    • OBS
    • XSplit
    • vMix
    • VidBlasterX
    • Wirecast
    • streamstar SW
    • mimoLive
    • Any other NewTek NDI-enabled encoding or streaming software

    Input Interface

    • HDMI
      • DVI-D 1.0
      • HDMI 1.4

    Storage Interface

    • SD Card (functions to be developed)

    PTZ + TALLY Control

    • Mini-DIN–8 jack

    Mounting Hole

    • ¼–20 mounting hole

    Network Interface

    • 10/100/1000Mbps Ethernet
    • IEEE 802.3af PoE

    USB Interface

    • USB2.0 Type B
    • 5V/2.1A power supply

    Input feature

    • Support input video resolutions at up to 2048x1200

    HDMI Specific Features

    • 165MHz HDMI receiver
    • Adaptive HDMI equalizer support for cables lengths up to 30M
    • Support for customized EDID
    • Support for extraction of AVI/Audio InfoFrames
    • Full colorimetry support
    • Support up to 2048x1200 4:4:4/4:2:2 60fps input signals
    • Support 8 input and 2 output IEC60958 audio streams
    • Support for extraction of audio formation information & channel status data
    • Support for extraction of video timing information
    • Support for extraction of 3D format information
    • Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.

    NDI® Output Format

    • Support for 4:2:2 8-bit output
    • Support for up to 2048x1200 60fps
    • Support for NDI 3.x

    Video Processing Features

    • Video processing pipelines with 160 Mpixels/s
    • Video brightness, contrast, saturation, hue adjustment
    • Video de-interlacing
      • Top field only
      • Bottom field only
    • Video aspect ratio conversion
      • Auto or manual selection of output aspect ratio
    • Video color format conversion
      • Auto or manual selection of input color format & quantization range
      • Auto or manual selection of output color format, quantization range & saturation range
      • Support for RGB, YUV BT.601, YUV BT.709, YUV BT.2020 input color formats
      • Support for YUV BT.601, YUV BT.709, YUV BT.2020 output color formats
      • Support for Limited or Full quantization range
      • Support for Limited, Full & ‘Extended gamut’ saturation range
    • Video frame rate conversion
    • Video mirror flip

    NDI® Source Name

    • Support for setting the device name shown in the system using Web UI. By default, the device name is ‘Pro Convert’.
    • Support for setting the source name shown in the system using Web UI. By default, the source name is ‘board-index + serial number’.
    • Support for setting board-index, from 0 to F, through on-board rotary switch

    Firmware Upgrade

    • Support for manual update using Web UI

    LED Indicator

    • Status LEDs indicate:
      • Power supply indicator: on/off
      • Input signal indicator: locked/unlocked

    Form Factor

    • 100.9smm (L) x 60.2mm (W) x 23.3mm (H)


    • USB 2.0 A to B Cable
    • 5V/2.1A power adaptor
    • Mini-DIN–8 (PTZ + TALLY) to RS232 (PTZ) + Mini-DIN–8 (TALLY)
    • Tally lights
    • L-bracket
    • LED matrix panel (optional)

    Power Consumption

    • 5V max current: ~1.5A
    • Max power consumption: ~6W

    Working Environment

    • Operating temperature: 0 to 45 deg C
    • Storage temperature: –20 to 70 deg C
    • Relative Humidity: 5% to 90% non-condensing