999-9560-000
999-9560-000
VADDIO 999-9560-000 OneLINK HDMI for Precision 60
VADDIO 999-9560-000 OneLINK HDMI for Precision 60

VADDIO 999-9560-000 OneLINK HDMI for Precision 60

VADDIO

FREE Ground Shipping

ITEM SHIPS DIRECTLY FROM MANUFACTURER. WE WILL NOTIFY YOU IF IT IS NOT AVAILABLE FOR SHIPMENT.
Vaddio’s OneLINK System for Cisco SX-80 Series codecs and Precision 60 cameras is digital camera extension system that extends HDMI video, power and network control on a single Cat-5e or better cable at distances of up to 328’ (100m). Without any sophistry or chicanery, this system allows for simplified and faster installations. The OneLINK system sends and regulates power to the camera, provides a bi-directional control channel for Ethernet and transmits/receives uncompressed HDMI digital video up to 1080p/60.

  • Single Cat-5e/6 camera extension system using HDBaseT
  • Extends HDMI video, power and Ethernet Control up to 328 feet
  • Includes OneLINK HDMI Interface (head-end) and codec cables
  • Includes OneLINK HDMI EZIM (camera-end) and camera cables
  • Power Supply and AC Cord Set
  • Camera Mount and Mounting Hardware also included (camera not included)

    SPECIFICATIONS
  • Included cables: One (1) 12” (305mm) HDMI cable(camera side), One (1) 12” (305mm) Cat-5e Patch Cable (camera side), One (1) 12” (305mm) Camera power cable(camera side), One (1) 36” (915mm) Cat-5e Patch Cable (codec side), One (1) 36” (915mm) HDMI cable (codec side)
  • Video Support: HDMI resolutions up to 1080p/60 for Precision 60 camera. The OneLINK architecture will support up to 2160p/30...for the future.
  • RS-232 Support: Pass-through
  • Ethernet Support: Pass-through
  • Camera Power Support: 12 VDC, 3 Amp at EZIM
  • Cabling Distances: Up to 328’ (100m) over Cat-5e/6
  • OneLINK Interface Power Supply: 48 VDC, 1.36 Amp
  • Connectors on OneLINK Interface: OneLINK Port on Shielded RJ-45F, HDMI Output Receptacle, Ethernet on shielded RJ-45F with LEDs, RS-232 on shielded RJ-45 connector, Power in on 5.5mm OD x 2.5mm ID Coaxial, connector (positive Center), IR Forward on 3-pin Phoenix-style connector
  • Connectors on OneLINK EZIM: OneLINK Port on Shielded RJ-45F, HDMI Input Receptacle, Ethernet on shielded RJ-45F with LEDs, RS-232 on shielded RJ-45 connector, Power out on EIAJ-04 connector
  • OneLINK Interface Dimensions: 1.72” (43.7mm) H x 8.375” (212.7mm) W x 6.00” (152.4mm) D
  • OneLINK EZIM Dimensions: 3.861” (98.07mm) H x 4.310” (109.47mm) W x 1.24” (31.5mm) D
  • OneLINK Interface Weight: 1.553 lbs. (703.1g)
  • OneLINK EZIM Weight: 0.553 lbs. (249.5g)
  • Operating Temperature/Humidity: 0°C (32°F) to 40°C (104°F), 20% to 80% Relative Humidity
  • Storage Temperature: -20°C (-4°F) to +60°C (140°F)