KANEXPRO EXT-HD100MHBT 4K HDBaseT 100-Meter HDMI Extender w/ PoE Support

Extend Uncompressed HDMI up to 330 feet with UltraHD 4K, Digital Audio & IR over single CAT6a

The KanexPro Long-Runner employs HDBaseT technology to route high-resolution HDMI signals from the source up to 330 feet (100m) to your HD display. It supports resolutions up to 4Kx2K (4 times the 1080p), multi-channel audio and IR extension over a single low cost CAT5e/6 cable.

Fully compliant with HDCP, EDID and CEC controls, the Long-runner HDMI extender is an ideal solution for HDMI extension over long distances.

Please note: This extender supports power over Ethernet, from either the Tx side or Rx side, and comes with only one power supply.

FEATURES

Extend HDMI signals up to 330 ft. (100m) on single CAT6 cable

Supports Power over Ethernet from Tx or Rx

4K x 2K Ultra HD resolutions

Infrared Signal Input/Output, embedded over extension

Supports resolutions from 1080p/60@48bit

High bandwidth up to 10.2 Gbps

Enables 3D pass-through

Supports CEC pass-through

HDCP and EDID compliant

Audio support: Dolby TrueHD & DTS Master Audio, 7.1 compliant

Uncompressed audio support such as LPCM

Front panel-LEDs for link activity and HDCP authentication

One external power supply included

SPECIFICATIONS

Transmitter Interface:

Input: HDMI

Output: HDBaseT (Cat 5e/6)

Receiver:

Input: HDBaseT (Cat 5e/6)

Output: HDMI

Video Amplifier Bandwidth: 10.2 Gbps all channel

Vertical Frequency Range: 50/60Hz

Resolutions (HDTV): 480i, 576i, 480p, 576p, 720p, 1080i, 1080p, 4K /30Hz

Computer Resolution: WUXGA (1920x1200)

Power: 12V DC@2A

Power Consumption: 9W (Maximum)

Regulatory Approvals Converter: FCC, CE, UL

Regulatory Approvals Power Supply: FCC, CE, UL

Dimensions: 3.93”x2.5”x1.0” (100x65x25.5mm)

Weight: 0.37 lbs. (170g)

Warranty: 1 Year limited

Helpful Tips & Recommendations:

CAT-5 cables should not exceed 330 feet or (100m).

Please adhere to the TIA/EIA568B standards when terminating network cables in the field.

Shielded CAT5/6 with metal RJ-45 connectors are recommended to safeguard against random video flashes caused by electromagnetic interference (EMI).

Do not use crossover cables, patch cables or Ethernet couplers to extend two CAT5 cables. This may damage the Tx & Rx.

If the power LED indicator on the Tx/Rx unit is not on, check to make sure that the CAT5 cables are not crossed i.e., Ethernet to Link instead of Ethernet to Ethernet.