The 6G-SDI interface board for the Sony 4K FCB-ER8300 can output the camera 4K image or a region of interest in 720p or 1080p (1080p50/59.94, 1080p25/29.97, 720p 50/59.94). You can move the region of interest position within the 4K image and switch instantaniously from one to the other with out restarting the camera.
The new iShot® 6G-SDI module converts the native video signal from the Sony FCB-ER8300 camera block into 6G-SDI standard. All the camera resolutions and frame rates are supported. Take advantage of the full range of HD resolutions the Sony 4k camera offers (up to 2160p 29.97) and much more...
Digital TMDS video input from Sony FCB-ER8300
6G-SDI (SMPTE ST2081) digital video output
Supports 4k resolution - 2160p25/29.97Hz
Supports 1080p50/59.94, 1080p25/29.97, 720p 50/59.94
Video format selection by micro switch
Board and camera management via RS232/TTL
BNC connector (SMB, MCX in option)
Power supply : 6 to 12 VDC, 6 W ( including camera)
Dimensions (W x L x H): 65mm x 55mm x 20mm
Content
USL20-30SS-012-C Cable assembly
2 way harness, 200mm long for power
3 way harness, 200mm long for communication
6G-SDI Connector Options BNC
Specifications
6G-SDI SMPTE-ST2081
BNC by default - MCX in option
Molex connector – BNC,SMB, MCX connector optional Up to 2160p29.97
DIP switches
VISCA – Default: RS232 level – TTL level (Option)
0°C to 60°C
SDI output SMPTE 292M, SMPTE 274M, SMPTE ST-2081
Compatible with SONY ER8230, ER8300, ER8530 and ER8550 4K Camera Block
Support external synchronization input
Support external Synchronization output (not yet implemented)
Generates synchronization signal for another TV10 0080 Board (not yet implemented)
Serial communication TTL or RS232
System control through VISCA protocol Camera Management
BNC, SMB or MCX optional connector for SDI output and Synch Input
Led Status indicator
