SONY ECM-44BC Omni-Directional Lavalier Microphone for Use with WRT-822 and WRT-8B

SONY ECM-44BC Omni-Directional Lavalier Microphone for Use with WRT-822 and WRT-8B

SONY

FREE Ground Shipping

OUT OF STOCK

Sony has produced over five million professional ECM (Electret Condenser Microphones) microphones and the ECM-44 is the affordable, general voice model. It provides good sound quality and is widely used in business presentation systems and TV production. The ECM-44 is available in four versions, featuring different connector types. This model, the ECM-44BC, has a 4-pin locking plug for use with WRT-822 and WRT-8B wireless transmitters.

Convenient to use
The ECM-44 is an affordable alternative to the traditional hand held microphone and being 'hands free' it allows the presenter to concentrate on her/his performance

Professional image
Either 'in front of camera' or at a business presentation the ECM-44 creates a professional and tidy image.

Easy to use
It can often be difficult to achieve good quality voice pick-up but the ECM-44 can help get good results. The microphone's capsule is designed for general voice pick-up with a mid-frequency emphasis characteristic and a suitable frequency response.

FEATURES

  • Tuned for voice pick-up - The ECM-44's capsule features an emphasis curve and a suitable frequency response for voice pick-up.
  • Compact size - The capsule has a diameter of only 8.5mm and is 14.5mm long.
  • Ready for wireless systems - The ECM-44BC is compatible with the WL-800 beltpack transmitters (WRT-822 and WRT-8B). It is easy to configure the ECM-44 in an affordable wireless microphone system for use with a Camcorder or in a presentation system.

    SPECIFICATIONS

    Audio Section
    Capsule Type: Electret Condenser
    Frequency Response: 40 Hz to 15 kHz
    Directivity: Omni-directional
    Sensitivity *[1]: -40.0 dB (10 mV)
    Output Impedance *[2]: 2.5kΩ±30%, Unbalanced
    Dynamic Range: 90 dB or more
    Signal-to-Noise Ratio *[3]: 62 dB or more
    Inherent Noise *[4]: 32 dB SPL or less
    Induction Noise From External Magnetic Field *[5]: 5 dB SPL or less
    Wind Noise *[6]: 40 dB SPL or less (with windscreen)
    Maximum Input Sound Pressure Level *[7]: 122 dB SPL
    General Section
    Connector: BC type. Supplied with Sony 4-pin (SMC9-4P) connector
    Mic Cable: 3.9 feet, 1.2 m
    Power Requirements: DC 1.1 V to 10.0V
    Power Consumption: 0.4 mA or less
    Dimensions *[8]: φ8.5 x 14.5 mm (Mic head), φ11/32 x 19/32 inches (Mic head), Approx. 24 g, Approx. 0.8 oz
    Supplied Accessories: Urethane type windscreen (1), Single/horisontal type tie clip (1), Operating instructions (1), Mic case (1)
    Optional Accessories: Wind screen pack, Horizontal single-clip pack
    Notes
    *[1] 0 dB = 1 V/Pa, at 1 kHz
    *[2] Output impedance at 1 kHz
    *[3] A-weighted, 1 kHz, 1 Pa.
    *[4] 0dB SPL = 20? Pa.
    *[5] dB SPL/1E-7 T, 0 dB SPL = 20? Pa.
    *[6] Wind noise at 2m/s (0 dB SPL = 20?Pa.)
    *[7] 0 dB SPL = 20? Pa.
    *[8] The values for dimensions are approximate.